http://zero-signal.org/2.4L/FMIC-1.jp g
http://zero-signal.org/2.4L/FMIC-2.jp g
http://zero-signal.org/2.4L/FMIC-3.jp g

Spent about 2.5 hours at the hobby shop trimming and cutting. 14 TPI Bi-Metal blades on the recip saw cut the bumper support like it was butter. A heavy duty box cutter and a couple of blades made quick work or the urethane too. I still have a little trimming to do here and there but it looks good.

Just need to wait until dark to re-align my HID fogs...

Thanks to AZDave who gave me some good pictures for cutting references.

Originally posted by CODE4
Spent about 2.5 hours at the hobby shop trimming and cutting.

Think you could spend just a little more time trimming those pics, lol. They be big!

Finally looking a little mean. Progress :cheers

Definitely. Forgot to break the link :p

that looks good. on a side note, why do all 2g's all sag at the bottom of the middle part of the lip? is there a factory plate that could straighten that up?

Originally posted by 420agreenvilleSC
why do all 2g's all sag at the bottom of the middle part of the lip?

Most people have removed the very bottom steel underlip support long ago plus with a FMIC the plastic radiator ducting is no longer used and that also helped a little with the support.

They don't all sag if you know a little trick. I'll show it to CODE4 next time he's in Phoenix and he can do a write-up if he wants to do the same. I'll also show him the molded corner inserts to hide where the black bar (moustache) was removed.



Corner insert

Originally posted by 420agreenvilleSC
that looks good. on a side note, why do all 2g's all sag at the bottom of the middle part of the lip? is there a factory plate that could straighten that up?

Its called not cutting half of your bumper off.

Also, I spray Great Stuff foam in mine. Cant tell its there, and it has plenty of support.

I still need to remove some material from my bumper. I wanted to take my time with it and not remove too much all at once at the hobby shop. If the lower part of the bumper sits closer to the FMIC it will take out a bit of that buckle in the urethane that you see on the lower piece.

And I did take that metal insert that was bolted to the bottom after I hit a tire on the road and bent to hell.

that looks great azdave. i look forward to getting mine straight. if possible.-

So how does the molded corner inserts work? Are they just fabbed up or did you take them from something else?

Originally posted by Nightfall
So how does the molded corner inserts work? Are they just fabbed up or did you take them from something else?

I molded and painted them separate to fit into the spaces with a small seam between so they look like they belong there. They don't need a completely molded-in flush fit (that usually cracks anyway) and also requires painting and blending a bigger area. I installed them with double-sided tape so they don't pop out if the bumper flexes.

your picture links dont work Code4, are you using firefox or IE

add the damn G to the link. We have had this conversation before!

Originally posted by CODE4
add the damn G to the link.

This.

Looking good, Dave. I remember when that car was all awkward with buck teeth and a dead alternator. In fact, I remember having to push start that car way out in BFE. Now look at it. Turning into a monster.

Rock on.

Both azdave and code4 cars are looking very good. Keep up the good work guys, you got awesome looking 2gnt's.

did you mount it to your bumper support?

The HRC mounts to threaded holes in the front of the frame using M6 threaded studs.

do you have photos with the bumper off? any photos of the plumbing?

http://zero-signal.org/AZDave-FMIC.zip

Grab that zip file, it is several pictures from a post AZDave had a while back.