| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Quick: Someone OBD2 W/ a SFAC & VC1 | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=10668 |
10668, Quick: Someone OBD2 W/ a SFAC & VC1
Posted by DarkOne, Oct-12-01 06:49 AM
LAST EDITED ON 12-Oct-01 AT 11:50 AM (PST)How do you wire these two things together so that they don't interfere with each other?
How do you have them wired??
_____________________________________________
-Dino Yancey
Hello me, it's Me Again!
For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE:
http://www.heavenz-not-0verflowing.com/files/
No MP3 for YOU!
|
10669, Bump -- Need to know!
Posted by DarkOne, Oct-12-01 09:42 AM
Anyone??
_____________________________________________
-Dino Yancey
Hello me, it's Me Again!
For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE:
http://www.heavenz-not-0verflowing.com/files/
No MP3 for YOU!
|
10670, RE: Bump -- Need to know!
Posted by guest, Oct-12-01 10:04 AM
bueller?...
bueller?...
bueller?...
fry?...
fry?...
fry?...
"Kaptain Mike"
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
theblueghost@hotmail.com
 1997 RS
Proud member of "ClubFourteen"
|
10671, RE: Bump -- Need to know!
Posted by XT_DSM, Oct-12-01 11:39 AM
http://members.home.net/xtatdsm
I am guessing here. I think it should go inline with the AFC (the same wire that the AFC modifies), all what the VC1 does is makes sure the map voltage does not go above than what the ECU should see (not more than 4.7 volts or something like that) and all what the AFC does is makes the ECU sees either less or more voltage than the map sensor puts out. so I think it would be more like (map sensor---------VC1-----AFC-------ECU)
Adel
Ported TB and Intake manifold ** ported and milled head ** PT rockers and lifters ** Crane Drag cams #16 ** Crane valve springs and retainers ** AEM cam gears ** Hotshots headers ** Greddy Cat back ** Iceman CAI ** S-AFC ** and the usual handling mods
|
10672, RE: Bump -- Need to know!
Posted by DarkOne, Oct-13-01 06:36 AM
Okay .. we went ahead a bit the bullet and wired it MAP -> AFC -> VC1 -> ECU .. it seems to work. The sensor check comes out fine, the pressure readings are okay (7in/7out) and it seems to get compensation (hard to tell with stock injectors) but we look okay .. so the injectors go in next, and we see.
_____________________________________________
-Dino Yancey
Hello me, it's Me Again!
For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE:
http://www.heavenz-not-0verflowing.com/files/
No MP3 for YOU!
| |