I accidentally tore off the connector from the wire that goes from the LCD to the little gray box. That connector has four wires on it (red, orange, brown, and black). Only a piece of the red wire was left on the connector (it was pin 1). Can someone here identify the colors that go to each pin? I can't find it online.

Pin 1- RED
Pin 2-?
Pin 3-?
Pin 4-?

THANK YOU!

I will get it for you this weekend if you can hold off until then.

EZ,

Red Constant 12V
Green Ignition 12V
Blue Acessory 12V
Black Ground
Orange Speed sensor
White Shift lock(Nissans)
Purple parking break

Hope this helps out mang. This is off the top of my head... don;t ask me why I know this useless piece of information.

Keep in mind this is for the old school Blitz Dual turbo timer. The manual is in Corona. LMK if you want me to mail you a copy of it.

Thanks guys.

Mike, I can wait for this weekend, let me know what you find.

Kaiser, I'm actually looking for the pin numbers for each color of the small wire that goes between the LCD readout and the little gray box. It's this small white flat connector that got ripped out, and I don't see that in the manual. If you can do a quick check on that little connector and see what colors go to pins 2,3,4, that would help!!!

Mike any update?

6 month bump! This TT is still in my trunk, help me install it already :+

Let me help a brother out.

I am pretty sure you are talking about one of the two connectors that go into the timer control box. Here are pics of both connectors.

/>

/>

/>

That's it! Thank you! :cheers

Originally posted by ez
That's it! Thank you! :cheers

Hell ya homie.