so my dad wants to replace this tube with a braided steel one instead of the ruber one.(2nd and 3rd pic)its connects through the oil pan to like, well i forgot wher. any idea where to get it at? also i have like some heat wrap that connects my intake to my turbo and i wanna replace that. any ideas? and wheres a good place to stop by to get couplers from? heres some pics. thanks

im assuming the bottom 2 pics are an oil return hose?
if so, go with -10AN fittings and ss hose from Aeroquip or if you dont have a local hydralic fiter then go to Jegs.com or Summit Racing and just use the inhouse stuff they sell

so the fitting is -10? like the one from here? http://www.jegs.com/p/JEGS/757777/10002/-1/10019

thats just the end fiting? then i would have to get my own hose too right?

the fitting you have there looks like -8an. either will work well. You will need a length of hose and a fitting. Now you can just buy the hose and clamp it on but its not as easy to work with later on.

-8an is = to 1/2" hose
-10an is = to 5/8" hose