| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Are srt-4 springs good for 2gnt's? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=104114 |
104114, Are srt-4 springs good for 2gnt's?
Posted by Cyexmaster, Aug-20-08 07:54 PM
Well since the srt is turbo stock it would make sense for them to be better than ours, do they fit and is it worth it to buy them or is it better to get some aftermarket one's.. It's just that I can get the srt one real cheap so wanted to know if it's worth it or posible to use them..
|
104115, RE: Are srt-4 springs good for 2gnt's?
Posted by PsychO, Aug-20-08 08:24 PM
No, they will not work.
Unless you plan on doing a 2.4L with a pt/stratus block.
The SRT has the same bore but the block has a higher deck.
|
104116, RE: Are srt-4 springs good for 2gnt's?
Posted by Cyexmaster, Aug-20-08 08:59 PM
Originally posted by PsychO
No, they will not work. Unless you plan on doing a 2.4L with a pt/stratus block. The SRT has the same bore but the block has a higher deck.
What does the block height have to do with the head's springs?
|
104117, RE: Are srt-4 springs good for 2gnt's?
Posted by PsychO, Aug-20-08 09:46 PM
My apologies, read your post wrong.
Another good question is if the hydraulic lash adjusters and rockers work too.
|
104118, RE: Are srt-4 springs good for 2gnt's?
Posted by foggy45, Aug-21-08 04:46 AM
no the springs wont work regardless of the Liter build
2.0 head use crower or crane springs if you feel the need to upgrade from the stock ones, and i would only use them if i was using upgraded cams.
2.4 build? uses the SAME head that is on our cars already so there is no difference in the head rotating assembly build-up.
rockers are from the 2.4L pt crusier or you can use SBC ones.
im actually unsure of the srt-4 rocker compatability, but with the pt's avaliable for little monsy id just go with them and avoid a possible misshap.
|