| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Sudden irratic loss of power on new 420a Turbo Install |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=102711 |
102711, Sudden irratic loss of power on new 420a Turbo Install Posted by Noogabox, Feb-01-08 11:52 AM
Okay I have an interesting issue, my car is acting funny and I need help to diagnose it. It runs and idles but when trying to smoothly accelerate ( not quickly) Its almost like the fuel is cutting out for a quater of a second , then it does it agian, and faster and more violent till I let off the gas. it doesnt make any noise just a sudden loss in power, However if I accelerate quick it doesnt do it at all!? This is my post for when I installed it. I have about 2000 miles on the setup maybe more but this is a slight driveablilty issue. The spark plugs are Vpower NGK and are currently gapped at .035 and I just put new Autolight premium wires in last night ( which appeared to help some) and its running BP 93 octane fuel and I am only running a 5 psi spring in the wastegate with no boost controller. I have a front mount intercooler. Do I have a injector problem??
http://upgradecar.blogspot.com/2007/12/starnes-420a-turbo-install.html
|
102715, RE: Sudden irratic loss of power on new 420a Turbo Install Posted by eclipse982nrRST, Feb-02-08 02:10 PM
What year car is it? Are you using a FCD or Missing Link?
|
102721, RE: Sudden irratic loss of power on new 420a Turbo Install Posted by Cyexmaster, Feb-04-08 02:22 AM
Well if it is 96 or after you need FCD or ML, mine did that and it was the ML that didn't have the filter on. so I put it back in and with something that doesent hold the air flow of the filter to hold it in place to make sure it stays in place. A piece of plastic and rubber bands worked for me! Also if you have some thing to tune with would help . After the ML thing I fixed the loss of power by adding fuel just before the boost kicks in start at 2000rpm and that shuold help.
Anything else just ask.
|