Im back after over a year of laying in total silence. alot of you may remember this thread back in june 2006...

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=4&topic_id=85510&mode=full

not long after the post i decided to go with MS instead of the e-manage. a friend of mine did all the computer crap for the MS. it was running and it was on the road. never got any numbers, just a mild street tune. it was a hammer. winter came around and since the megasquirt i was using wasnt mine while it was sitting it was taken. i got a new job now and work out of state and am never home to even attempt to finish this project. i know there's alot of highly experienced people with alot of 2gnt experience here. so basically im looking for someone to finish this thing for me, weather it be an experienced shop or individual. its been so long since ive even worked on a car or been on this thread so i totally forget just about everything i read over the past 3-4 years. i dont even know if im posting this in the right section of the forums!

if anybody has any information or can point me in the right direction of where i can go i would very much appreciate it. the car is sitting in central pennsylvania and im in texas, and i just want to get the freakin thing running! ive put too much time and money in this car to let it sit and rust away. you can email me directly at lilhazer1411@aol.com or adam.hazenstab@gsinc.com or call my cell 814-934-2429

thanks for your help!

-adam hazenstab

So... all you need is megasquirt? Do you still have the wiring and sensors installed? I'm in Ohio so let me know when you're ready to fix.

Originally posted by wickedtalon
So... all you need is megasquirt? Do you still have the wiring and sensors installed?

I'm a little confused too. What point are you at? What exactly are you asking for (for completion)?

yes all the wiring and sensors are still wired into the relay board. i literally just need the MS and tuned.

Hmm, if I understand this correctly, you are a lot closer to being done than you think. The box just plugs into your existing cable/harness. You can get a box all done from at least two members here at 2gnt. You should have the previous tune from when your friend had his box on yours. He can e-mail that to you and then you just load it up. Maybe you don't have a laptop to load it? Then just have your friend load it up and send it to you.

I am selling a ms1 v3.0 board already built with the 420a mods. It will control fuel as is, and I will include 2 vb921's if you choose to run spark with that method. You say you already have the sensors as well as the db37 cable, which is perfect because I am not including them. Let me know if you're interested.

more info here:
http://forums.2gnt.com/dcboard.php?az=show_mesg&forum=16&topic_id=109301&mesg_id=109301&page=2

ok so i ordered a megasuirt and a new turbo. my friend is going to load what we had before on to the MS and then im gonna take it somewhere to get dyno tuned. anyone know of any good places near/around central PA?

Contact Matt at Dent Sport in Norwood, Mass (1-781-551-3399). He's a top MSnS tuner. He MAY be able to give you a reference to someone in the area.