| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | aem wideband |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=102444 |
102444, aem wideband
Posted by 420at270, Jan-09-08 06:18 AM
i just bought a widband a/f guage was wondering what sensor i needed just bought gauge not the full setup.
thanks for any help
|
102445, RE: aem wideband
Posted by foggy45, Jan-09-08 08:38 AM
Do you have the gauge integrated contorller (30-4100)? or just the display (gauge) that is an add on to a controller?
if its just the add on gauge then you either need UEGO controller 30-2300 & 30-2301 for the display to work.
as for the sensor for both options, its a bosch sensor that you can order from AEM the part number for a replacement UEGO sensor is 30-2001
or get it from Jegs (#017-30-2001) its $67
|
102446, RE: aem wideband
Posted by justins71, Jan-09-08 08:43 AM
mine has some laser-etched serial chip thing in the connector that has to match up, not sure again if you have a simple gauge or the controller. I have the controller type, and am curious about how i'll change the sensor when it goes out. probably just a wire-in will be needed.
|
102447, RE: aem wideband
Posted by BoostedEclipse, Jan-09-08 11:29 AM
I got the one that goes with the uego controller before and for some odd reason(probably with my wiring)it fried the controller. The one that is used with the controller doesn't have any harnesses that can be plugged into the back of the gauge, it just have a harness already built into the back of the gauge. I got the 6-1 AEM wideband now and I love it. I think the cheapest I found the bosch sensor was at cardomain, but not sure.
|