have any of you tried this thing yet? it looks promising. not too expensive either. i just want to know if anyone here has been personally aquainted with it?

That was my next purchase before I decided on buying the Evo. I have a feeling it will do wonders for the simpler setups. Sure beats the S-FMU setup. Try it!

I am real interested in this as well....If anyone trys it and likes be sure to post.

Thanks all

Anybody have the link for it again?

Looks like it would work very well and it's plug and play, but I can't find anywhere that has one for our platform.:(

ok, so there are a couple people on the aempower.com forums that are putting it on neons. one problem so far and they don't have harnesses for our car yet. i'll keep a close eye on this. their getting some type of cut under load and they say it's cause the ecu isn't seeing the injectors pulse??? idk. check it out.

They aren't planning to EVER have harnesses since every year would technically need a specific harness from the multiple ECU setups that were used from 95-99. Its really not that difficult to hook up with the universal harness. Just go step by step. It costs them a few grand to get one harness designed,proven and setup for mass production and there just isn't enough revenue in it for them to get that involved.

thay aren't specific on what make and model they are working on but they are planning on a 99 neon so why not our cars? they are more commonly customized. well, even if they don't make'em, i still want it. that is after they work the bugs out.

I'm assuming to wire up one of these would be like wiring up for MSnS? If so, that shouldn't be hard at all to do and everyone won't need a plug and play harness.

It requires about a 1/3 of the wiring involved with MSnS. This is the best thing available for our cars besides going with a full standalone ECU setup like MSnS.