Got one of these from JEGS, fits directly into the stock FPR location, no trimming needed and comes with its own gasket. The bolt Idea on the Wiki works great too I guess but I liked how this looked a lot better. And it's -6 so with an adapter a person could hook up a pressure gauge without havin to T off a line under the hood for a cleaner install if you wanted an electric one inside the car.



<a href="http://www.ringo.com/photos/photo.html?photoId=224365455"><img src="" border="0"/></a>

INSANE! I still trying to figure out that mani.

Thanks for the info on the fuel system adapter

Tom

Yeah, I just couldn't bring myself to stuff an o-ring on a bolt and jam it in there.

Mani is still in the testing faze...I'll give up a lil more on it later. As for now the wastegate dump tubes are going to be revised as soon as the turbosmart 38mm's get here.

so if i read that right its # 991945ERL?
which is an Earls -6 AN Male to 12mm x 1.25 Male O-ring fitting?
Correct?

sweet find

yup, I can double check it this weekend when I get home but I'm pretty sure thats it. Then I just capped it with a -6 cap. I would have gone with a -4 but I couldn't find one that adapts to the metric thread at the time. It also comes with its own gasket that resembles something like a washer but rides up on the threads like an o-ring. It's designed for a holley or weber carb or somethin like that but fits in the factory spot on our cars just the same, that is if yours is in the back under the seat.