2GNT.com Forums - Printer friendly page, topic ID #100519 -

100519, S-FMU Mounting area and fitting for return.
Posted by ChloRure, Jun-17-07 06:22 PM

I'm trying to figure out where I can mount this b**ch. That thing is HUGE! I have the cruise control so cant use that space. Also i dont want to remove my windsheld washer reservor... what a stupid idea. Now im thinking to put it under the car and hope to not tune it too often... anyone put it in a special area ?

Oh and im using 6an SS line for feed bought some high pressure injection hose for return. i want to know if this fitting is suitable for to hook the hose on the return port of the sfmu!

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D220756&N=700+4294924496+4294839052+4294849583+4294906726+4294906724+115&autoview=sku

thanks :)

100522, RE: S-FMU Mounting area and fitting for return.
Posted by totaleclipse_05, Jun-18-07 06:59 AM

You are pretty limited where you can mount your SFMU then. Those would be the main two spots to do it. Your guess/decision is as good as any where to put it right now.

About your return-line question, read up on this from the Wiki:

http://www.2gnt.com/index.php?d=Fuel%20Return%20Line%20Set%20Up

100523, RE: S-FMU Mounting area and fitting for return.
Posted by jshillin, Jun-18-07 07:43 AM

I have mine wedged in at an angle beside the Cruise control.

100524, RE: S-FMU Mounting area and fitting for return.
Posted by ChloRure, Jun-18-07 07:45 AM

Originally posted by jshillin
I have mine wedged in at an angle beside the Cruise control.

Do you have any pics ?

Oh and for the return line I think that should be ok, ive read the wiki and they talk about 4an or 6an to ss... Since I want to use rubber for return Ill try this fitting.

100525, RE: S-FMU Mounting area and fitting for return.
Posted by jshillin, Jun-18-07 07:46 AM

No, I don't have a pic, but I'll try to take one this evening.

100529, RE: S-FMU Mounting area and fitting for return.
Posted by jshillin, Jun-18-07 01:02 PM

I have my SFMU in the top left hand corner.

100534, RE: S-FMU Mounting area and fitting for return.
Posted by RfOeCnKdOeNr, Jun-18-07 04:00 PM

This is my SFMU located on the passenger side firewall. Pretty spacey if you ask me.

100535, RE: S-FMU Mounting area and fitting for return.
Posted by ChloRure, Jun-18-07 06:15 PM

Thanks for both pictures ! Ill try to hold it with a special bracket need the cruise control. On the second pics I have a blackbox there on my car.

100538, RE: S-FMU Mounting area and fitting for return.
Posted by RfOeCnKdOeNr, Jun-19-07 02:27 AM

Hmm... Well I don't have cruise control, power windows or moon roof, or any of that stuff. So all I had there was the horn for my alarm. I just had a pic and thought it might help. Good Luck!

100539, RE: S-FMU Mounting area and fitting for return.
Posted by jshillin, Jun-19-07 09:56 AM

Originally posted by ChloRure
Thanks for both pictures ! Ill try to hold it with a special bracket need the cruise control. On the second pics I have a blackbox there on my car.

Cruise makes it tight just like mine, it is wedged in place. I have a zip tie on it just to be safe, but it can't move.

100546, RE: S-FMU Mounting area and fitting for return.
Posted by ChloRure, Jun-19-07 07:10 PM

Originally posted by jshillin
Originally posted by ChloRure Thanks for both pictures ! Ill try to hold it with a special bracket need the cruise control. On the second pics I have a blackbox there on my car.
Cruise makes it tight just like mine, it is wedged in place. I have a zip tie on it just to be safe, but it can't move.

Ive made my brackets... it look most like you now !

Thanks :)

100547, RE: S-FMU Mounting area and fitting for return.
Posted by Slo2g, Jun-20-07 01:11 AM

Damn, props man, that is one clean engine bay.