Does any one that has built their own fuel system have any pics of how they routed their lines? I'm running a 3/8" alum. hard line to a -6 braided line for a feed and using the factory feed for a return, but can't think of a good place to run the -6 braided up from under the car. The cradle piece seems to close to the belly pan of the car to run a line in between and I don't feel comfortable with going near my exhaust or come up by the axle. Any Ideas guys?

Originally posted by quicksilver99
Does any one that has built their own fuel system have any pics of how they routed their lines? I'm running a 3/8" alum. hard line to a -6 braided line for a feed and using the factory feed for a return, but can't think of a good place to run the -6 braided up from under the car. The cradle piece seems to close to the belly pan of the car to run a line in between and I don't feel comfortable with going near my exhaust or come up by the axle. Any Ideas guys?

Its not impossible, but very inconvinient and annoying to run them up between there. I ran both my feed line and a new return line up there and along the firewall.

I ran alum to the crossmember then braided through the slot that DJ showed. Its easy to run 6an braided there, I suggest pushing the line from the top to the bottom as opposed to the other way.

Terry

Thanks, thats kinda what I figured I would have to do.