98591, RE: 1 JE pistons out of this set is too big???? wtf?
Posted by thedawg, Dec-31-69 06:00 PM
Originally posted by Blizare
Block was just bored .020" over and I just got it back here and 1 of the pistons doesn't fit into the cylinder??? After measuring them I came up with 87.9mm for 3 and 88.5mm on the fucked one. P/N are the same on all the pistons? Has anyone had this issue?
BTW,
stock = 3.444"
87.99mm = 3.464" or ".020 over"
88.5mm = 3.484" or ".040 over"
Someone just mixed up. The part numbers are the same, but you have to pay attention to the size as well. Post the vendor name so we can laugh at them again.
|