Go back to previous topic | Forum name | Turbo/Nitrous Tech | Topic subject | RE: Possible Blown Motor, Possible Solutions, Your Help Badly Needed!!! | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=97168&mesg_id=97191 |
97191, RE: Possible Blown Motor, Possible Solutions, Your Help Badly Needed!!! Posted by Avenger, Dec-31-69 06:00 PM
Originally posted by biggnasty -install boost controller for 15 lbs with 1:1 custom regulator to run at 110 fuel psi at idle.
WTF? 110 psi?!?!?! No way is that going to idle and no way you'll find a 1:1 that will let you up the pressure to 110psi.
I believe what Dan was saying in regards to a better fuel system was either
A. Replace HRC Cartech (also known as the CRAPTECH) with a Vortech SFMU rising rate regulator (something that can do greater than a 1:1 rise rate)
B. Replace CRAPTECh with a 1:1 FPR (Aeromotive, MagnaFlow, Holley, etc. but NOT custom) but also replace your fuel management system. So going with an 8 injector setup (port fueler, 034EIC, etc.) or gettin a megasquirt or other type of standalone fuel managment system.
| |