Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectRE: Possible Blown Motor, Possible Solutions, Your Help Badly Needed!!!
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=97168&mesg_id=97174
97174, RE: Possible Blown Motor, Possible Solutions, Your Help Badly Needed!!!
Posted by thedawg, Dec-31-69 06:00 PM
Originally posted by biggnastySo its only the ringland? This would also cause coolant to burn off through the exhaust? Also, will replacing the pistons with forged pistons make this problem totaly go away, and not happen again staying under 18 pounds of boost?

It could be a blown headgasket too, you detonated quite a bit to shatter the piston, so you could very well have blown the HG too. A total engine rebuild would get you on your way, but you need to get bigger injectors, a real FMU like Aeromotive or Vortech ("custom"? wtf?). Read the turbo forum a lot, and decide if you want to keep your turbokit and invest $3000-5000 into rebuilding. If you don't have that kind of cash, sell your turbo system and do a stock rebuild.
I generated this page in 0.0091071128845215 seconds, executing 6 queries.