Go back to previous topic | Forum name | Turbo/Nitrous Tech | Topic subject | RE: updates and whatnot, some somewhat large images... | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=50708&mesg_id=50773 |
50773, RE: updates and whatnot, some somewhat large images... Posted by ner947, Dec-31-69 06:00 PM
yeah, i remember that thread from a few weeks ago... i just forgot to watch it and didn't see that someone figured out the issue. however, i've already completed 2/3 of the work with designing my own apparatus, and i think it's much cooler to make the thing from the ground up.
today was pretty slow at the office, so i worked a little bit more on it. i have the voltage comparator working like it should, although soldering to it was definately a PITA! the whole chip is smaller than my pinky fingernail. (oh yeah, i'm an imagestation n00b. sorry about the broken links above, i think i have it figured out by now)
![](http://www.imagestation.com/picture/sraid66/p246f2d2f25c2920f3cc2f1618273d0bb/fbe2f553.jpg)
yeah, it's pretty ghetto and thrown together, but i proved to myself that it works.
![](http://www.imagestation.com/picture/sraid66/p2b961eba65cd9d4c03d0a867da3e8899/fbe2f557.jpg)
and here's the schematic so far:
![](http://www.imagestation.com/picture/sraid66/pd058c151ba1318e86599f62a072b43a6/fbe2f559.jpg)
i still need to design some type of amplifier circut to take the final output voltage (it's either 0 or 1.6ish volts depending on what the pressure sensor is doing) and convert it into useful power to drive the relay. after that, i just need to solder everything together for real and put it in a box.
anyways, just thought i'd update things.
| |