| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | RE: Alternative fuel setup to FPR, hi-flo pump, Missing Link | | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=32994&mesg_id=33032 |
33032, RE: Alternative fuel setup to FPR, hi-flo pump, Missing Link
Posted by Collente, Dec-31-69 06:00 PM
OK,so I leave the board for an hour, and all this happens...
I have been emailing zip back and fourth trying to figure things out. He is going to mod the smc just for dsm's. We use a little different voltage settings then the honda's. I told him that the WOT is 4.5v and he needs to know our idle voltage. Someone told him that our map can only see 1-2 psi. xtremeRs you say that it is 1bar? (15psi) This changes a lot. He wasn't sure if it would work, because of this. Does anyone know what our idle voltage is? I dont ahave a voltameter handy...
This would not be be key for 15psi+ but im only going to be running 7psi (for now ;) ). I think this is a cheap easy solution for the most of us.
my setup,
Walbro intank fuel pump.
IHI RHB5,
7PSI
SMIC
35lb ford injectors (not installed yet)
100octane pump gas :)
Nick
97RS
| |