Originally posted by Grothe3297avenger

Originally posted by Star Turbo Talon It can be done depending how you set it up. First off your confusing a SFMU with a FMU. 2 different pieces of equipment. 1. SFMU is an FMU and Regulator combined with adjustable rising rate. There is no reason to run both but you can do it if you want to waste money and you dont know how to use the SFMU. 2. 1:1 with FMU is done the same way you would set up any other Regulator with an FMU. In our case the 1:1 with a FMU is pointless becuase the FMU makes having an aftermarket regulator pointless UNLESS your trying to lower your base pressure.

I know the difference between the two.. And as to your #2 - this is basically what I was saying, would be pointless hence it really won't work

And thats where your issue lies. Saying it wont work is not accurate. It will work just fine, its just too redundant to run the two regs together. I understand what your saying but your not getting your point across when you make a comment like "it wont work" because that alone is wrong.