Low down, I removed bumper cover, due to recent mishap with a lady driver, have the new bumper. I'm also, goin to install my new foglights OEM style oval, but I notcie that my factory fog lights has a push clip on type, easy snap to install the stockers.

Problem here's my NEW Foglight wires its not the same as factory.

L@@K here,


Is there a universal harness that macthes the factory retainer clip push button to click into the Oem harness.

I'm lost and need some help on this one.

Here's what my New Foggy's look like.


I know some of you guys have similar style foglights, but these are PILOTS BLUE Oem fogs.

Could someone explain or if there's a write up on installing Foglights like these.

Mybad, if this is in the wrong area, Thankyou in advance.

Originally posted by dalesmitsu
Low down, I removed bumper cover, due to recent mishap with a lady driver, have the new bumper. I'm also, goin to install my new foglights OEM style oval, but I notcie that my factory fog lights has a push clip on type, easy snap to install the stockers. Problem here's my NEW Foglight wires its not the same as factory. L@@K here, Is there a universal harness that macthes the factory retainer clip push button to click into the Oem harness. I'm lost and need some help on this one. Here's what my New Foggy's look like. I know some of you guys have similar style foglights, but these are PILOTS BLUE Oem fogs. Could someone explain or if there's a write up on installing Foglights like these. Mybad, if this is in the wrong area, Thankyou in advance.

Solidering is no, problem I've done it many times on my guitars. So, its a breeze don't have to be a rocket scientist either :rolleyes

Are you sure the wiring on the car now is for the foglights? My RS doesnt have the foglight wiring preinstalled. I know there are plugs up front in mine but i know for a fact they are not foglight harness plugs.

I would say do some testing to prove they are foglight power and if they are just pick up a weatherpack connecter and solder them in.

Terry

Originally posted by Star Turbo Talon
Are you sure the wiring on the car now is for the foglights? My RS doesnt have the foglight wiring preinstalled. I know there are plugs up front in mine but i know for a fact they are not foglight harness plugs. I would say do some testing to prove they are foglight power and if they are just pick up a weatherpack connecter and solder them in. Terry

Thanks, Terry your the man.

I'll post pics of my OEM foglight connectorsplus them too.

They both look the same but my newbs lens are blue.

Where could I find the weatherpack connector, I would need two.
Driverside and passenger side

weatherpack conns are available at any junyard, just look in any GM car for a ale and female connector. If you want new Pep boys now sells them in the electricial section. You need to buy two males and 2 female connectors then solder them in.

Terry

Originally posted by Star Turbo Talon
weatherpack conns are available at any junyard, just look in any GM car for a ale and female connector. If you want new Pep boys now sells them in the electricial section. You need to buy two males and 2 female connectors then solder them in. Terry

Here's what the connectors look like on my Oe foglights.

This one is from the harness Sorry bad res. u see its orange.

These are from the foggys different angles.


Here's one of my New bumper

Originally posted by dalesmitsu

Originally posted by Star Turbo Talon weatherpack conns are available at any junyard, just look in any GM car for a ale and female connector. If you want new Pep boys now sells them in the electricial section. You need to buy two males and 2 female connectors then solder them in. Terry

Here's what the connectors look like on my Oe foglights. This one is from the harness Sorry bad res. u see its orange. These are from the foggys different angles. Here's one of my New bumper

Could I cut and solider these connects from my stock fog lights to my new ones.

How anyone experience with Pilots blue OEM foglights.