Go back to previous topic
Forum nameInterior/Exterior
Topic subjectHow to Install Shift Boot
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=97797
97797, How to Install Shift Boot
Posted by crashoverburned, Feb-05-07 08:08 PM
I recently ordered a custom yellow shift boot and e-brake boot made specifically for the Eclipse, so there's no need to be cutting anything. The problem is, I'm not sure how to install them. I'm guessing that the e-brake boot you just slide on, but I have no idea on the shift boot. Does it require any glue or what not, or can you just unscrew and screw the console. I've taken my interior apart before, but not the center console, other than the kick panels, so I dont' want to mess anything up. Any help is appreciated, thanks.
97798, RE: How to Install Shift Boot
Posted by edxmon, Feb-06-07 03:40 AM
Its easy peasy man. Although...I see no need for an E-brake boot on out cars, it will just look bulky and not-good in my oppinion, but any who... should have told me about this boot, I made my own out of red vinyl. Cost me about $4 and 15 min of my life, should have just traced the 4 pieces of your old one and cut a new one.

To take the boot out:Take out the center console. There are screws in the back of it on either side of the bottom of the arm rest. Then I belive the is some more in the front, around where your feet lay. You may need to slide the seats to access some of these. Before you pull the console out, you need to pop out the AC control bezel. Just pry it out carfully so that you dont scratch it or brake it. I THINK thats all that needs to be removed for now. OH NVM! if you have an arm rest cover, take it off, and the tray too, there is some screws in there, by where the airbag controls are bolted to the bottom of the frame. NOW take pick the console out slightly AND UNPLUG THE GCIG LIGHTER, if you dont, you'll rip the cables out. NOW yo can get to the boot, all you do is unscrew the small frame like plastic that holds it down, and unhook the slits on the boot that are on the flaps of the bottom of the boot. Then just slip your new one on, and your done. Put it all back toghether and be happy :thumbsup

here's a quick pick of the one I made:

97805, RE: How to Install Shift Boot
Posted by kain_99gs, Feb-07-07 03:08 PM
Write up with pics. Even though really you shouldn't need one...

http://www.team-2g.com/mitsubishi-eclipse/showthread.php?t=11104


http://talontimes.blogspot.com


99GS
95TSI
97806, RE: How to Install Shift Boot
Posted by crashoverburned, Feb-07-07 06:17 PM
Thanks for the response guys. Now I'm off to install those boots.
97809, RE: How to Install Shift Boot
Posted by hazardeclipse, Feb-08-07 01:12 PM


Go team. *high fives all around*
97810, RE: How to Install Shift Boot
Posted by edxmon, Feb-08-07 01:14 PM
LOL... wtf?

NASA says:



haha jk, although you should have put a reference in there that makes them a "shift" boot. :thumbsup , good skills on MS paint tho.
97817, RE: How to Install Shift Boot
Posted by kain_99gs, Feb-09-07 12:44 AM
IMO...







http://talontimes.blogspot.com


99GS
95TSI
97819, RE: How to Install Shift Boot
Posted by djtrickee, Feb-09-07 05:03 AM
Now that's funny.
97856, RE: How to Install Shift Boot
Posted by ez, Feb-13-07 01:03 PM
Originally posted by edxmon



for some reason your boot reminds me of a hypertrophied heart with an aortic anuerism. good job

97857, RE: How to Install Shift Boot
Posted by edxmon, Feb-13-07 02:33 PM
Originally posted by ez
Originally posted by edxmon
for some reason your boot reminds me of a hypertrophied heart with an aortic anuerism. good job



hmm you know.. you're right, I never noticed! Maybe 'cuz its red?
:-o