Go back to previous topic
Forum nameInterior/Exterior
Topic subject97-99 conversion - how hard is it?
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=95046
95046, 97-99 conversion - how hard is it?
Posted by nVert, Jun-17-06 08:01 AM
I am currently looking for a nice eclipse and have recently come across a 95 with only 67000 miles. Now what I'm wondering is how hard is it to switch out the front/back bumpers and sideskirts for the 97-99 versions? I don't like the 95-96 look and I won't purchase the car unless I can switch out those parts myself. Thanks.
95047, RE: 97-99 conversion - how hard is it?
Posted by cyan, Jun-17-06 09:07 AM
not hard at all. completely bolt on.

plus, once you have the stock bumpers taken off the first time, you can reinstall them using about 1/4 of the amount of bolts they come attached with from the factory, thus making future tasks much quicker and easier.
95048, RE: 97-99 conversion - how hard is it?
Posted by DarkEclips96, Jun-17-06 10:16 AM
Yea its not very hard. The side skirts might be a bit of a challenge to find though.
95049, RE: 97-99 conversion - how hard is it?
Posted by EclipseTenzoR, Jun-17-06 10:26 AM
The front bumper is really easy, I can take my front bumper off in about 5 minutes no kidding. Undo a few bolts and it slides rite out. Here is a link to azdaves write up on the front bumper removal. Also I dont see the rear bumper being much harder.


http://www.rcaz.com/rcaz/sub%20indexes/eclipsebumper/index.htm
95050, RE: 97-99 conversion - how hard is it?
Posted by MCubed45, Jun-17-06 01:15 PM
don't forget you need new lights as well.

front bumper
rear bumper
side skirts
headlights
reverse lights


idk if the door caps are the same. the sideskirts don't look that different anyways though so you could prolly just keep the 95-96 ones if you wanted.
95054, RE: 97-99 conversion - how hard is it?
Posted by surgeon_general, Jun-18-06 12:50 PM
u have to do some fabricationg if ur going from a talon to eclipse. see my picture. its easy though. yellow lines are where the eclipse style bumpr bolts up. i know your talking about an eclipse so really its a useless post, but jsut throwing it up there.





95056, RE: 97-99 conversion - how hard is it?
Posted by CustomGS, Jun-19-06 05:48 AM
Just buy mine!! ;-)
96437, RE: 97-99 conversion - how hard is it?
Posted by talonman77, Sep-07-06 07:23 PM
Originally posted by surgeon_general
u have to do some fabricationg if ur going from a talon to eclipse. see my picture. its easy though. yellow lines are where the eclipse style bumpr bolts up. i know your talking about an eclipse so really its a useless post, but jsut throwing it up there.


Actually this is what I needed to know for my Talon. I wanna put the eclipse rear on there and I have read the write up but this pic helps a whole lot more Thanks.
96442, RE: 97-99 conversion - how hard is it?
Posted by dalesmitsu, Sep-08-06 03:56 PM
Originally posted by nVert
I am currently looking for a nice eclipse and have recently come across a 95 with only 67000 miles. Now what I'm wondering is how hard is it to switch out the front/back bumpers and sideskirts for the 97-99 versions? I don't like the 95-96 look and I won't purchase the car unless I can switch out those parts myself. Thanks.


Not hard at all,

First go and buy the Haynes Manuel on 95 thru 99 dsm's

and again this will save you some bling $$$$$ go to this site below they have the front/rear and side skirts

http://www.mitsubishioemparts.com

They sell and carry ALL OEM body Parts for DSM's and EVo's etc.

So, hurry go there now.:cheers
96459, RE: 97-99 conversion - how hard is it?
Posted by hazardeclipse, Sep-12-06 03:30 AM
or wings west sells oem style urethane side skirts that are one piece that come with the door caps
96469, RE: 97-99 conversion - how hard is it?
Posted by BlackMagic, Sep-12-06 04:04 PM
Yep it's definitely one of the easiest mods I did, and made the most difference in the appearance.