Well since I am not very bright.... my bookmark is set to the old page and my homepage is set to the new one. so the few people that posted on my original post and its not here thats why.. I screwed up... any ways here are the pics.




Now the color is actually IS300 yellow with a blue pearl over it. It is a lot brighter in person. These pics were takin at HIN in San Mateo.. Unfortunatly I didn't win crap... oh well I don't have any interior... damn corbeau hasn't shipped my seats.. and I haven't done anything else yet... So let me know what u guys think.

Jeff
96Tsi

I am to damn lazy to re type all of the crap I used to have listed here. if you really wanna know.... To damn bad!!!

haha you are retarded, must have inhaled paint fumes, but it looks good, sorry i missed the show

I love how theres two scoops on teh side!!!! Nice color.... im just not diggin the taillights man.

OZ racing package
AEM cold air intake
Sidewinder alarm w/remote start
AFX underdrive pulley

That IS your car dude. Be happy, I would love to have it :)


Still being designed but worth a look!
www.extreme420a.com

impressive...

Brandon
AIM: DSMitsu95
'95 GS, Auto.
AEM CAI w/ bypass
Maxspeed Coilovers
Pilot FU STB
2 12" Pioneer IMPP's
Best ET: 17.243 @ 80.67 mph



"Illegal? Yes. Dangerous? No doubt. But for those few, fleeting seconds as we party with Power and Speed, the insanity seems to makes absolute sense."

Dammnn looks nice jeff. You should take a closer pic of the vent on your fender...how did the paint come out? Glad to see you made it to HIN...

eclipse804@hotmail.com
http://www.importvenom.com
Import Venom - Parts and Performance

dood the rear is GROSS take it off other than that nice job dawg

nah, keep the areo gear, it looks good, your car would look better with some clears tho....

oh,and bring it back up to chico to have it redynoed and bring it to the races, actually, i just wanna see it

OK here are some pics of my car from a diff/nicer digi cam from the same night... sorry bout the size but its for your viewing pleasure :-)




Here are some cuties that wanted pics by my car and my friend happend to take a few for me :-)


I should have a smile on my face but my friend took the picture at the wrong time

and here is a pic of a fine model that was there





I am to damn lazy to re type all of the crap I used to have listed here. if you really wanna know.... To damn bad!!!

Nice hair Jeff. Good luck with the one on the right!


Still being designed but worth a look!
www.extreme420a.com

Looks AWESOME Jeff! I likey!

but the taillights...i do NOT likey! :)

Can you bring the one on the left to Houston for me? PLEEEEEEEEEEZE?!!


"Kaptain Mike"
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
theblueghost@hotmail.com
1997 RS

looks great.. how did you do the headlights?

Damn jeff, your car is looking nice. But the tails look kinda funky like others have said.
Oh and one other thing. Get some rims!!

SHHHHEEEEEIIIIT!!!!!!!!

Gimme those rims then! :)

Better than my 14s. I like those rims he got! (Konig Monsoons, right?) thats what i wanted fer mine!


"Kaptain Mike"
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
theblueghost@hotmail.com
1997 RS

to do the headlights u gottta pull them apart and then the piece I painted is seperate from the rest of the headlights.. so I just pulled it out and painted it. as for the rims... I like them but they are to small I need at least 17's maybe I will rival lindsay and get 19's hehehe prolly not... I might just get 18's but nothin bigger. as for the taillights..... KMA.... j/p I personally like them but I will eventually make them all the same color as soon as I get the lenses...... but I know other people who don't like them.... to each his own.... but I will tell u this thats the part of my car that got the most attention... aside from the BOV that is... :-)


I am to damn lazy to re type all of the crap I used to have listed here. if you really wanna know.... To damn bad!!!

Body shop did a great job! Especially with molding those sides in. Yeah I like the Vette taillight conversion, just think they should be the same color. But nice ride either way.

I'd love to post some pics of the women at Chicago HIN... but Guy has to get those duplicates made first (hint, hint...)

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

After all the made hrs of labor I went through doing the body work... well shaping... my front put in the vents and I did all the rest of the work molding the sides...shaping them shaping the front vents and so on... I wish I would have given it to a body shop.... this was my first time doing body work and lemme say this I will live a happy life if I never have to touch another can of bondo or fiberglass again.... :-) but I did most of the work aside from the actuall vent installs.... but I would be able to do them now. they are soooo easy the hard part is all the shaping and sanding and more sanding...



I am to damn lazy to re type all of the crap I used to have listed here. if you really wanna know.... To damn bad!!!

I'll tell you straight up 'bout your ride because I expect people to do the same for me with mine, don't take what I say to heart if you can't take critism...

1. I like the rear, almost bought it. I decided to stick with my stock one because I havent come across the one you have in person. Good rule to buying a kit, see the kit in person.

2. I never liked the buddy club front on any car, you should have stuck with the Sensei front!

3. I love the painting of the headlights, I think that stuff is smooth.

4. I agree with everyone else, chuck those tail lights, stock ones look better or go with Altezzas with the 3 red circles and paint the inside casing yellow.

5. I dig the hood. Can't go wrong there, ever.

6. My opinion, but I dont like the fenders from what I can see in the picture.

7. Grab some black engine paint and spray your inside fender wells black, you got nailed with overspray. Same thing happen to me when I got my car back from the autobody shop.

8. Those sideskirts are bad ass the way they came! Especially with doorcaps. They look clean like the stock ones did, but with an aftermarket edge. I'd probably have to see what you've added on in person. The reason why I don't like this is because the car came with a line all the way across the door and fender on each side. I don;t like anything that goes above that line, doesn't match in my opinion. Anyone else feel that way?

9. I'm guessing you went 16" wheels because of performance reasons? I'm willing to bet that with a 17" wheel with maybe a 45 series tire woul be about the same as the setup you have now. Might actually pic your car up a .25" for more clearance too because I know how these kits are!

10. I love the color!

The rack on this chick is grrrr-eat. Sign me up. Tell her I said "Hi."

yeah jeff, get ya some nice 19s. look, i even did the hard part and found a set for you. these are a great set from what i can tell, you should buy them haha
http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=596092160&r=0&t=0

PIC-CHAHS: www.blue2gnt.homestead.com FULL SITE: www.geocities.com/blue2gnt

hey! I dont know why...but those rims look sooooo familiar to me! :P

"Kaptain Mike"
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
theblueghost@hotmail.com
1997 RS

That is sweet. Do you have any advice on doing molding like that, as I will be doing sideskirt molding over the winter.

Good Vibrations Performance & Audio
For all you cars needs
gvperformance@hotmail.com

Installed- Aem CAI, Apexi Megaphone Dunk cat back, NGK plugs

Sitting in room-Neuspeed race springs
More to come.....

where did ya get the headlights i have never seen those before!
all the other porjectors do not have the piece that you painted.
please let us know man
later
"Z"

as far as molding.... my advice is.... let someone else do it unless u have lots of time and are willing to deal with not having them finished. I was sooo sick of working on my car... everytime I thought I was done I would primer it and I would see pin holes or waves or somthing and it just seems like a never ending process. but if u want to send me an e-mail and I will see what I can help u with. as for the projectors... they are tjhe regular ones... you know when u order them and u order black or chrome housings? well thats what I painted mine were black housings and I painted them to match. thats all.

Jeff
96Tsi
basikstylz@hotmail.com
Basikstylz -AIM

I am to damn lazy to re type all of the crap I used to have listed here. if you really wanna know.... To damn bad!!!

Another good point I'd like to make is that you WISELY stuck with a bright, light shade color for the car...cause if you did a dark color, you would not be able to see those vents and holes as well as with a light color :) Good job, Jeff. *pats on da back.....


"Kaptain Mike"
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
theblueghost@hotmail.com
1997 RS

Jeff that car is tight........peeps were grabbing cards when you started spitting off the BOV...any way Will, TJ and I are trying to enter a few cars next year as a group im assuming you are down to be one of those members. I just got a FMIC ,DP and a Apex-i exhaust in preparation for next year.........so in a few months maybe we can go over some paint and vynal schemes for my GSX.........Curtis 96 GS 95 GSX DSMXtreme.com...P.S .Im pissed Wyatt didnt show...He missed out on a GRAND opportunity to promote his shop.....You saw the crowd the Type S was drawing. Maybe he will inter the Turbo GS....We are aiming for at least 5 cars.