Ok, I've been using Grain's little notes for hooking up the stock switches to spal power windows, but I just CANNOT for the life of me get the passenger switch to work.

I was able to make the driver's switches (both driver side & passenger side) to work perfectly to roll down both windows.

The Driver side switch has one extra wire coming out of it which is a black wire (ground), however, there is no such wire coming out from the passenger switch. I have tried multiple ways of hooking it up and have fallen short of success. It's weird, because on the drivers switches, the brown w/yellow wire is the up for the motor, however on the passenger end, that same wire is the ground for the passenger.

Now I have been able to get the passenger switch to make the window go down, but not up. I feel i'm missing something here, or could it just be that my passenger "UP" switch is broken?? thanks.

THIS IS THE NOTES I'VE BEEN REFERRING TO:
(I don't know which green wire he's talking about on the passenger side)

Door-----------------Spal
-------------------------
Blue-----------------Red--------power for up/down
Black----------------Brown------ground
Green/Red Stripe-----Black (window Actuator) neg
Green/Black Stripe---Red (window Actuator) - pos

i forgot what colors goto the green wire and black wire for the spal kit to the pass. side window from the drivers side.

Passenger Side
------------
Door-------------------Spal
----------------------------
Blue/Black Stripe------Red
Brown/Yellow Stripe----Black
Green/Yellow Stripe----Green
Green/Red Stripe-------Red (window actuator) - pos
Green/Black Stripe-----Black (window actuator) neg

nevermind, I just broke my switch. :( Anyone have an extra passenger side switch I can buy? hehe.