Does anybody have white gauge/ indiglos that actually fit the M/T (9K rpm)..all i see is the auto ones. I want the blue indiglo looking ones to match my APEXi EL gauge. Holla

ALvin



Star stage I
Starion I/C
GReddy BOV
Nology Wires
APEXI EL Boost Gauge
Southland Dual Friction Clutch
B&M Short Shifter/ Shifter Bushings
17" Axis Wheelsite Mesh - 235/40
Camberkits
Eibach Sportlines on KYB AGXs
Strut Bars/ GST Rear Sway Bar
X-Drills w/ Axxis pads
Andy's Front Bumper
Stock Skirts
Cleared Headlights

Try http://www.nrauto.com





Eric R. Madden
99 GS

- K&N cone
- 5E plugs
- Magnecore 8.5
- GS-T exhaust

those aren't indiglo, in the description it says "Night Graphics: Black face with amber numbers " plus there 129 bucks.

anyone else, know of any, i'm interested also

Heck of a bump here.

If you want a set that actually has all the right numbers, you have to buy two sets: the tach from a turbo set, and the rest from a NT set..

Or you can just buy the turbo gauges, and deal with the speedo being off..
_____________________________________________
-Dino Yancey
Hello me, it's Me Again!


For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE:
http://www.heavenz-not-0verflowing.com/files/
No MP3 for YOU!

Actually you can't just buy the turbo gauges because they have an oil pressure gauge and boost gauge, so the cutouts for the side small circles (besides the tach and speedo) are a lot different. I remember matching them up to see if it was possible, but it's not. So ya, you have to get two sets of indiglos, one from a turbo eclipse (for the tach) and one from the nt eclipse, for all the gauges besides the tach...

eclipse804@hotmail.com
http://www.importvenom.com
Import Venom - Parts and Performance

My roommate got a set of Indiglos from a local shop here in Dallas, and they're correct. They are actually for a M/T NA 2g Eclipse. Go figure... I'm unsure of brand though.

Clint

Go back and look closer at NR Auto, they do have indiglo gauge faces for us... and i "think" they are the correct rpm range. I'm just not sure on what my interior color scheme is going to be or I would have gotten them.

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT (partially installed)

http://www.nrauto.com/gauge_body.asp?id=155





Eric R. Madden
99 GS

- K&N cone
- 5E plugs
- Magnecore 8.5
- GS-T exhaust

That page does have the indiglo gauges for the M/T eclipse. The pic they have shows a 9K rpm tachometer. They are on sale for 116

Actually, I just installed the white ones. What a pain, should have stuck with the stock ones. Broke a needle rest, had to tape them to the back of the gauge face because the holes where they go in where too big, hard to get the needles back in the right spot... I guess I was just expecting a easier install, oh well, they look good though.




Eric R. Madden
99 GS

- K&N cone
- 5E plugs
- Magnecore 8.5
- GS-T exhaust

I just installed my turbo reverse indiglo gauges(green,purple,blue) and had to trim the gauges a little at the corners of the gas and temp to get arond the screws that you cant get at so they would lay flat...boy was it a pain trying to fish the wires through the back..other than that no problemo!