I tried prying the SOB with a foot long piece of pipe and it just does not want to curl. Is thre a technic...i know it sounds stupid and it seems easy, but what is the procedure?

ALvin


Star stage I
Starion I/C
GReddy BOV
Nology Wires
APEXI EL Boost Gauge
Southland Dual Friction Clutch
B&M Short Shifter/ Shifter Bushings
17" Axis Wheelsite Mesh - 235/40
Camberkits
Eibach Sportlines on KYB AGXs
Strut Bars/ GST Rear Sway Bar
X-Drills w/ Axxis pads
Andy's Front Bumper
Stock Skirts
Cleared Headlights

Iv seen this post before and I should have asked! What the f@#k are you talking about?????? And why??????






1995 RS
16x8 Momo's
CAI
4-2-1 Headers
2.75 in Tenzo cat-back exhaust
carbon fiber s%^t
2nd gen altezza's
GTS carbon look headlight covers
Apex-I Super AFC
Eiboch lowered
Momo pedals
Indiglo gauges
Autometer gauges/pillar pod
Front, Rear, upper and lower strut braces(neuspeed)
Clarion auto pc with navigation sytem
Clear front corners
Ported throttle bodie(55mm)
Racing stripes (one 2" one 6" side by side down the passenger side)
Custom front grill
"mitsubishi inside" sticker (my favorite)
I got lots more mods but Im tired of typing :)

Ugh, is that "use a baseball bat to extend your fenders" post making a come back? Don't do that, don't listen to that noise!

-Nick

I used a baseball bat to bend the rear fender "knife edge" up away from the tires in the back. That was what was rubbing on the back tires on my car. I didn't bend the fenders themselves, just the stupid knife edge that hits the tires.




http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Yea..well thanks...FYI I needed to rool the inside of the fenders because I have 235/40 on a Sportline 2" drop. Anyhow it workt


Star stage I
Starion I/C
GReddy BOV
Nology Wires
APEXI EL Boost Gauge
Southland Dual Friction Clutch
B&M Short Shifter/ Shifter Bushings
17" Axis Wheelsite Mesh - 235/40
Camberkits
Eibach Sportlines on KYB AGXs
Strut Bars/ GST Rear Sway Bar
X-Drills w/ Axxis pads
Andy's Front Bumper
Stock Skirts
Cleared Headlights

I just used an adjustable wrench and bent it little by little. It worked nicely and no risk of slipping and fucking shit up.