Finally the last pieces are on and as of last week became a daily driver again after a year of paint and engine modifications!

http://dsmtuners.com/gallery/showgallery.php?cat=500&ppuser=35240


Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

Sorry here you go !
















Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

well... at least the color looks good.

2 suggestions... get some lowering springs to drop that wheel gap a bit, and PLEASE ditch those tail lights for some stockers. otherwise i think it looks good.

EDIT: and get a set of 97-99 stock headlights

Originally posted by GSGoinFast
2 suggestions... get some lowering springs to drop that wheel gap a bit, and PLEASE ditch those tail lights for some stockers. otherwise i think it looks good. EDIT: and get a set of 97-99 stock headlights

scratch that, you need 95-96 stock headlights since you got the 2Ga front bumper.

I really like the color and the hood though, very nice paint too

ricetastic!

Yeah I thought everyone would say that(taillights and headlights and bodykit)but I got the headlights because of the projector and halo with the totaly open inside and they don't offer them in 95-96 models.
The body kit is faired in except for the nose piece(would a newer stock nose piece look wierd with these sides and rear?Probably huh.

The tailights are probably going back to stock>new pieces of shit leaking and fogging up!

But I do like the body kit because no one in my area has it.

The only reason I haven't lowered it is beacuse I'm waiting for Tein to release the motorized coilovers here in the states.

Any other suggestions, Improvements?

The paint is Mercedes Benz Bahama Blue pearl metallic.


Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

I must say that is a sharp looking car....good luck with it

...Paint looks good! :thumbsup

Originally posted by rucr8z2
Any other suggestions, Improvements? The paint is Mercedes Benz Bahama Blue pearl metallic. Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

Yea, I know I really can't afford to buy new rims and such because I'm in college and my car is constantly breaking down, but some bigger rims would probably look better on a kitted car such as yours. It looks good either way though.

Tail lights go back to stock, paint the mirrors to match the car, should have gotten the black housing headlights instead of chrome, and get gunmetal rims. Just my opinion.

Hey, you sum-beotch stole my wing!!lol Dig the color of it, and there are few of us with the Wings west three piece!!+

Originally posted by jdpilot
Hey, you sum-beotch stole my wing!!lol Dig the color of it, and there are few of us with the Wings west three piece!!+

Yeah, I like the wing alot! Nice big LED brake light on it.
Yeah,she's a little ricey but got the power to back it!
Now I just need a clutch to hold it!LOL


Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

Is that car sponsored by NaPa? is napa the next autozone?

Wow why all the hating coments? It doesnt even look bad.

Besides the wheel gap, headlight gap and tial lights it looks real good IMO. Nice

Originally posted by djtrickee
Is that car sponsored by NaPa? is napa the next autozone?

actually it is partially sponsered by my shop Deltaville auto service and is a napa autocare center.I'm using this car for shows and driving to and from work on nice days.


Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

Originally posted by csmakio
Wow why all the hating coments? It doesnt even look bad. Besides the wheel gap, headlight gap and tial lights it looks real good IMO. Nice

People with stock bodies just hate people with body kits thats all. I like both but if I had started all over I prob. would have not gotten a body kit either, gets very old very fast....

is that stock muffler?

Not too bad. It's not my favorite kit but ehh. I would change to the stock tails with a painted center. I love the way the red looks with blue for some reason.

came out sweet man! Hit me up on my clubs forum http://www.streamlinemotorsportsva.com/phpBB2

We can hit up the tracks and the shows this summer!

Dude, did you paint your rear tirewells too?? I don't know if that looks good. But on another note, its pretty nice for being a kitted car ;-)

No the exhaust is not stock it's 2.5" Dynomax stainless tuner catback system with a stainless testpipe after the downpipe

The wheelwells have overspray in them> I have to tear into them and repaint the wells and suspension components. Then put my innerliners back in.

Cool,AGGRESSION get up with me, I was thinking of going up to Richmond and checking out Team Absolute this weekend, but I know more about your club.....



Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

Car looks good. Man I can't believe how many people have that damn kit now. I've had mine for like a freaking year and a half. I had to wait for ever to get mine from Japan. Tip on the tail lights, if you don't wanna cahnge them, then paint the middle piece the car color, I did that and it looks way cleaner. I also ahve a green car and the black chrome altezzas. I have a vis gt 2 carbon hood, make sure you put a lot of heat shielding under the hood. The hoods will crack from the heat above your turbo and manifold area. I see you have the heat shield, I'm picking up one of those next. I have to get my hood fixed now cause it's all cracked in the middle. When you go on the freeway, watch your hood, it will wobble and shake like a bitch. Put hood pins on! As soon as I hit 80 the first time and had thoughts of my hood flying up like tommy boy, i put them on.

The only negative I can say about the car are the mirrors. Chrome isn't doing for me. To each their own. I have the m-3 lighted (turn signals) mirrors painted my car color and they look pretty bad-ass.

Are you gonna pull out dual cans on the back? I thought about it, but the weight it will add, and now real power performance, didn't make too much sense to me.

Originally posted by xceler8
Car looks good. Man I can't believe how many people have that damn kit now.

Hate to say it but the Bomex Kit is the next Blitz kit


2.4 Swapped

i dont hate to say it, it's true, im looking for a different kit right now!

paint looks great but what is up with the back windows?

dude, if you want those type of headlights AS 95-96, its simple. Just put those suckers in the oven and remove the lens, NOW use your old 95-96 lens and attach them on the projectors and WALLA, you now have 95-96 projectors as you so wanted them originally & not to mention you will no longer have a headlight GAP!

look at my sig, can you tell my headlights are 95-96 with a 97-99 lens? no, you cant.

edit: ]

Originally posted by 96rs-t
dude, if you want those type of headlights AS 95-96, its simple. Just put those suckers in the oven and remove the lens, NOW use your old 95-96 lens and attach them on the projectors and WALLA, you now have 95-96 projectors as you so wanted them originally & not to mention you will no longer have a headlight GAP! look at my sig, can you tell my headlights are 95-96 with a 97-99 lens? no, you cant. edit: ]

Actually I'm looking for a new front nose piece any suggestions?
Now the sides are molded and so is the rear so what would look good on the front?
I'm getting a 99 stock front and maybe some other one(r34) cause I've got about 2 quarts of paint left and I want to use the Bomex for show only cause it sticks out like a sumabitch and I'm afraid I will hit everything.


Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

nice ride man. looks good.

Looks really good man!! Love the color. I donno but for some reason i really like the SF2 front bumper. Heres a pic

Yeah the sides window covers are made by Auto Vent Shade

Those nose pieces ar choice but isn't anyone coming out with anything new?Everything is the next Blitz because no one makes anything new!

Do you think a stock nose piece(99gsx)with a lip would look decent with these sides and rear?anyone care to photoshop one?

Blue is definately the color of choice!


Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

Originally posted by undisputed
paint looks great but what is up with the back windows?

Those are made by AVS (correct me if I'm wrong). If you go to their site you see a whole bunch of stuff, made to overlay parts of various cars.

Originally posted by rucr8z2

Originally posted by 96rs-t dude, if you want those type of headlights AS 95-96, its simple. Just put those suckers in the oven and remove the lens, NOW use your old 95-96 lens and attach them on the projectors and WALLA, you now have 95-96 projectors as you so wanted them originally & not to mention you will no longer have a headlight GAP! look at my sig, can you tell my headlights are 95-96 with a 97-99 lens? no, you cant. edit: ]

Actually I'm looking for a new front nose piece any suggestions? Now the sides are molded and so is the rear so what would look good on the front?

BC2 IMO.

bomex front bumper is SO FUCKING UGLY... but everything else looks bad ass, good job.
Nick
97RS

Originally posted by Collente
bomex front bumper is SO FUCKING UGLY... but everything else looks bad ass, good job. Nick 97RS

Thanks and I didn't realize that the bomex stuck out so far!
Bodykits are cool and all but they kinda get old after a while so I'm planning on swapping out the nose piece.

I've also got my original mirrors painted to match I'm planning to put on.



Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)

yes.. yess please god stock mirrors, stock body. i guess you can keep the wing, stock headlights, stock tail lights, painted center peices. what a waste of paint on that body kit. my favorite color aswell.