Not sure how to post pics but heres the link, should be done tommorow. http://www.dsmtuner.com/forums/showthread.php?t=181742

Not to be an asshole, but you posted this on dsmtuners in the appropriate forum, but not here?

Looks good and good luck running it.

Ummm.... right below the link to click on interior/exterior it says and I quote "Modifications, Maintainance and Problems related to the interior and exterior. PLEASE post ALL car pictures here" Am i wrong??? :shrug

Granted their is a pic, but its more along the lines of motor rebuild / turbo.

I suppose... anyway....

Originally posted by eclipse7782
Ummm.... right below the link to click on interior/exterior it says and I quote "Modifications, Maintainance and Problems related to the interior and exterior. PLEASE post ALL car pictures here" Am i wrong??? :shrug

Iunno but that engine bay looks dang sweet. Nice work.

I see one of those twin turbo air intake things, interesting.

Thanks, so much work but definitely worth it. The intake sits great in the engine bay and since i have the vented hood the intake sits right infront of one of the vents. My idle fuel pressure should be 20 psi at idle right? I have 440cc injectors, sfmu, and the walbro 255 fuel pump. And where should the screws be set to on the side of sfmu: vacuum, boost, and bleed? Also what should my egt's be around??

Now your getting into what should be in the turbo section. Please do yourself a favor and search before you go asking them questions.

I have searched and cannot find exactly what i am looking for. We need a section that just shows commonly asked questions with exact answers. It should say 440cc injectors, SFMU, Walbro 255 static = and idle = because i cant find it in any of these posts. The question is answered but there is never an exact answer.

http://www.dsmtuner.com/forums/attachment.php?attachmentid=51123&stc=1

That's exactly what I was talking about in a different thread a long time ago. How heavy is it and who made it?

looks good dude

18-22psi idle pressure with 440's and dont mess with the other screws and get an afc, cuz your gonna need it.

Originally posted by 420a-Tnthewerks
http://www.dsmtuner.com/forums/attachment.php?attachmentid=51123&stc=1 That's exactly what I was talking about in a different thread a long time ago. How heavy is it and who made it?

Not heavy at all, and i made it. Just take the stock carpet cover off and make a template of the half shaped moon area and stop at the 2 humps. Then take your template and trace it onto a 1/4 inch sheet of plywood. Cut the plywood out with a jig saw. Use high strength liquid nails to secure the plywood to the rear dash peice, remove some of the medal brackets from below, cut out your 6x9's, carpet it and your done.

Good Job man, looks great!