I will just give you my CD link, make things a little easier. Let me know what you think. Sorry the camera doesnt do my clear job any justice.
http://www.cardomain.com/memberpage/678620/7

LOOKS COOL, NOW MAKE ME SOME FUCKING CARBONFIBER DOOR PANELS :)

You do know if I made those, they would only be covers, right. There would waaaaay to much work to fab a full CF door panel.

Originally posted by DJ420a
You do know if I made those, they would only be covers, right. There would waaaaay to much work to fab a full CF door panel.

thats all i want is a cover to go over my door panels with 2 speaker holes for 2 speakers and thats it.

Originally posted by eclipse982nrRST

Originally posted by DJ420a You do know if I made those, they would only be covers, right. There would waaaaay to much work to fab a full CF door panel.

thats all i want is a cover to go over my door panels with 2 speaker holes for 2 speakers and thats it.

Well I am working on the lower speaker panel in CF to hold a 6.5". Im gonna cover it sub material first till I get more CF cuz I want my system in. I'll show you what the panels look like in a day or 2.

Great work man. Is that your little girl in the picture?

Yeah, she wanted to drive, lol.

lookin good. let me know when you get those pods to hold your speakers done, I've been wantin to move my shiny silver components out from behind my gray bland door grilles for awhile now.

Dude that shit is tight for real......:thumbsup

wana give me your car

yah that looks really sweet man good work!

I am a carbon fiber addict and need to attend CFA meetings.

UR ADDICTED???? lol look at my cars :)

would u consider making those parts again ???? i'd buy :)

Originally posted by lrseclipse
UR ADDICTED???? lol look at my cars :) would u consider making those parts again ???? i'd buy :)

Of course I would. Ching ching, always talks, lol. Just get ahold of me so we can get your specific needs. Like I dont know if you would want the guage pod to hold 5 gauges, even if thats the piece you want.

hmm, what all can u make ?? :) hehe. could u make that top piece to hold an SAFC or something??? i already have 6 guages in my car hehe
and u were talking bout kick panels and stuff too? what all have you made so far?

I can pretty much make any interior piece, either be an overlay or a full replacement. As for the Safc fitting I can do that. You have to IM me or something so I know if thats the only thing you want in there.

Would you be willing to share your techniques?

If not I understand

I just know alot of ppl that would go nutz over that around here

And I have the worlds cheapest junkyard at my fingertips

Whats up man how much to do the small section of the door panel like yours with the hole ready for a tweeter? lmk

Originally posted by satal95
Whats up man how much to do the small section of the door panel like yours with the hole ready for a tweeter? lmk

IM me, and we can discuss the prices.

i have been trying to make pieces for a long while now with no luck. If i even manage to get it straight and dry I get tons of tiny pin hole bubbles in it. How do u prevent this? please share?

Well, like I said in the email I sent you, it all depends what you mean.

If your getting pin holes/bubbles in the resin. Try these
1. Layin the resin thinner.
2. Using a roller like these..http://www.shopmaninc.com/fgrollers.html
3. If your trying to use a dryer of some sort to help the catalyst, try doing a little less. You dont want your piece getting too much hotter than its normal curing temp.


If your getting the probs while clearcoating.
1. Check your airpressure at the gun. I spray at 30-35 psi.
2. Dont try to put any direct heat to cleatcoat. I have learned (the hard way) that you shouldnt do this. Atleast overly amounts of heat.


For curing both resins and clearcoats quicker than its natural curing process, Ive found this worx pretty well.
1. Get a box that the piece you made will easily fit in.
2. Make sure any king of dust/dirt is out of it.
3. Get a hair dryer, the kind with 2 speed settings.
4. Cut a hole in the top on one side big enough to fit the tip of the dryer in.
4. Cut another hole on the opposite side for an escape vent. I didnt make mine any bigger than like 2" round
4.Stick your piece in the box and seal it up.
4. Stick the hair dryer in the top, turn it on, on the low setting. Make sure you angle it to where it facing the side of the box. You dont want it blowing direct air on the piece. Could get a ripple affect.
5. I let mine sit for 15 to 20 mins at a time then check it.


I might have forgot some things, Im really hung over and it hurts.

those are some awesome parts, i really like those door panel pieces, ive been lookin for someone to make those for awhile, looks damn good

Well somebody else on this board asked me to make a pair for him and I said I would. Its been a few weeks cuz I needed to care of some other things (painting the house :(). Now Im done and have supplies coming in, so if anybody else wants some, just PM me and will work it out.

I also have a mold made for the armrest.

DOOOOOOOOOOOOOOR PANELS!!!!!!!!!!!!!!

Originally posted by DJ420a
Well somebody else on this board asked me to make a pair for him and I said I would. Its been a few weeks cuz I needed to care of some other things (painting the house :(). Now Im done and have supplies coming in, so if anybody else wants some, just PM me and will work it out. I also have a mold made for the armrest.

you know I'm down for some CF door panels :D

Well what do you guys mean when you say door panel? Do you mean stripping everthing of it, and just making a mold of the panel that screws to the door? Or do you mean with everything still on it?

Originally posted by DJ420a
Well what do you guys mean when you say door panel? Do you mean stripping everthing of it, and just making a mold of the panel that screws to the door? Or do you mean with everything still on it?

err not door panel
I was thinking the bottom section of it, everything below that ridge, that runs midway through the door, switched to CF, with a spot for a 6.5" speaker built into it

Originally posted by BumpinTalon

Originally posted by DJ420a Well what do you guys mean when you say door panel? Do you mean stripping everthing of it, and just making a mold of the panel that screws to the door? Or do you mean with everything still on it?

err not door panel I was thinking the bottom section of it, everything below that ridge, that runs midway through the door, switched to CF, with a spot for a 6.5" speaker built into it

GGGGGrrrrrrrrraaaaaaaaaavvvvvvvvvvvyyyyyyyyy, lol

so any of those rollers will work for the resin? cause i've used those and it made a ton more holes then without using it.

Its really hard to give exact advice without seeing it. Can you get a pic?

Originally posted by DJ420a
Its really hard to give exact advice without seeing it. Can you get a pic?

I'm thinking it sounds like to much hardner, go light on the hardner and let the bubbles work themselves out. Also when mixing don't whip it like your making a cake, it allows to much air in the mix. And even though its nice, sometimes its best to not overflood the first coat.

Wisely spoken :thumbsup

would you be intersted in doing some more parts for a great price(as in i'll pay great)????

wow i'm interested on buying some...

I didnt forget about you guys that want some CF. Im making molds and gettig my ducks in order.

Would you be willing to do something other then you show? I would like a cf pod to hold my guages, but want it a bit different then any shown.

Originally posted by DJ420a
I didnt forget about you guys that want some CF. Im making molds and gettig my ducks in order.

ducks in order...lol...good line

Originally posted by ScreaminE

Originally posted by DJ420a I didnt forget about you guys that want some CF. Im making molds and gettig my ducks in order.

ducks in order...lol...good line

Oops, did I say that wrong? lol

Right now Im also working on a pod that will sit up against the windshield and the dash, in between the 2 defroster vents. I think that would be good place, cuz it wouldnt be hard to focus on it.

It wont rattle on the windshield. It may/will cover some of the defroster vent(not much) depending how many guages are needed.