Hey,

Has anyone replaced the outide Handle.. Mine broke, and I have a replacement.. I just can't figure out how to take the door apart. I have already taken off the First part of the door (Plastic part). I just don't want to have to take off the window to get to it.. Any ideas?

Thanks alot,

Jason

Do you have a Chilton's repair manual, I remember seeing in there how to do it.

-Toney
'97 RS 5 Speed
GST exhaust | custom cold air intake | axxis pads | Hurricane_GS shifter | Progress Springs | Rockford Fosgate MP3 Player & Speakers
TDaug@yahoo.com

Me and my dad did mines. Went to open the door and the stupid thing just cracked inside. You definately have to take the door panels off and then take off the screws. You should then be able to take it off pretty easy. Didnt take much time. Hope this helps.


95EclipseGS
Stock engine
Eclipse804's exhaust (waiting to be installed)
Clear Corners
JVC Kameleon Head (W/Voice Recognition)
2 10" Jensen Nitro subs
"Ricey" seat belt pads
Thats all for now

i fucked up the drive side door handle when i put it on. so take your time!!!!!!!
=================================================================hrc stage 2 turbo

Getting the door lock back on is the hardest part. It's held on by a small clip that tends to get loose and not wanna go back on. You also should have a really small (minitiature) socket wrench with 8 and 10 mm small sockets I think, and maybe a crescent wrench. The nuts holding on the door handle are really hard to reach.

eclipse804@hotmail.com
http://www.importvenom.com
Import Venom - Parts and Performance