This question is for anyone with a 2g with 19" rims...
if you have ANY good pics of your 19's please post them for me.
also, if you would, please include your tire size and suspension setups if your lowered or not and what kind of suspension products you are using. i JUST ordered 19x8 axis seven mods rims for my widebody and looking for suggested tire sizes and what springs or what not you guys use for your drop if you are dropped at all. please help with pics and details please.
thanks in advance!

99GSBBTurbo has 19" Sinkos on his car... http://www.cardomain.com/id/99gsbbturbo

i had a friend that had 19s on a gsx he had like an inch and a half drop before he bagged it. did u order the same wheel sized for all 4 or did u go wider in the rear? sevens will look good. u ever decide on a color yet? i was at the paint store gettin some slick sand poleyester primer for the big weekend project :) and they had a color chart of hot hues from dupont paints, they had some pretty bright colors, there were like 4 different yellows and golds there was like 30 different colors on the brochure, u should check em out i think u will find what u are lookin for. probably not too expensive either.. hollar at your boy :)

Im running 19x8.5 Ikon P35's. The tires are BFGoodrich Scorcher TA's 225/35. With the 8" rim you will run either a 225 or 235 tire. I had to run a 225 because my offset is a little crazy and the rims are so wide...though 235 probably would have fit...it's tight though.

I am lowered on H&R Sport springs. I only rub if I hit a decent sized bump really hard. I think Ive only rubbed once or twice. I never rub in the back, only the front -- the front is a tad lower as I can only fit 1 finger between the tire and the fender.

I dont have many pictures yet because it is so cold out, but I will get some soon.

I'm running a 19x8.5 ADR Cyphers with 235-35-19 BF Goodrich Scorchers
I'm lowered 1.75 inches with Sport Technology springs. I have NO RUB in my wheel wells what-so-ever, hence that is why my License Plate says 19 NO RUB, hehe. :D

I have the 19" ADR Sterling's with 225/35 Toyo Proxies FZ4 rubbers.
Suspension is the full coilover B&G kit, but it is sitting at stock ride height until next year.

i went with the axis seven mods in 19x8 all around with a +42offset. I am going to use Toyo tires and i guess im gonna try out the tein s-tech springs since i really only need to lower about an inch or so.
i am pretty set on this color below in the pic though, i think its gonna look good with my cf hood and apr cf mirrors. hope you like it the color....i think the axis rims are gonna look hottttt!
http://www.visionautodynamics.com/products/viewer.asp?productID=2236

like no other... which door kit did u put on? and how was it to install. the car looks good with the shaved handles and all. i am gonna b ordering some lambo doors very soon. also what did u pay for em if u dont mind me askin???