Would anyone be interested in this? My sister did mine and it looks great. I'll take some pics either tonight or tomorrow so you can see it, but if you guys are interested, make a list with your userID, what material you want (cloth, leather, or vinyl) what color you want(not quite sure what we can do yet, so post, and we'll if it can be done) This is just for general info... as of right now we're only doing eclipse/talon seats. We figured about $180-$200 for the two front seats in black vinyl. The rears can be done, but we're still working on logistics for that... Thanks guys

User ID Material Color(s)
1.

User ID Material Color(s)
1. WarnerC - black vinyl - if those pictures look good :)

User ID Material Color(s)
1. WarnerC - black vinyl - if those pictures look good :)
2. FlyinESi - Black/Silver Leather - Outside of seat black, center in silver - Back seats the same.

Pics and then I will let you know.

Originally posted by RSClipse9d7
Pics and then I will let you know.

ditto

Yeah, that is implied in mine as well...must see pics and get price on the back seat.

Originally posted by BumpinTalon

Originally posted by RSClipse9d7 Pics and then I will let you know.

ditto

i agree.

yea i'd need some pics and a price as well...i'd be interested in black leather front and rear

yea i'd need some pics and a price as well...i'd be interested in black leather front and rear

yea i'd need some pics and a price as well...i'd be interested in black leather front and rear

sorry for triple postin..but i think i'd rather go w/ vinyl..def. want the rear tho 2 ;)

Originally posted by reeveso
sorry for triple postin..but i think i'd rather go w/ vinyl..def. want the rear tho 2 ;)

Holy shit, post pictures!

OK, here's the link to the pics... Please note this was the prototype... you'll notice the driver's seat fits a little better than the pass. seat, and the rear seat looks better than the both of them combined... that's the kind of learning curve we're looking at here. Erika (my sister) is REALLY good at this stuff, so the quality will definatly be there... Here's the link...
http://forums.kaptainmyke.com/index.php?showtopic=3435&st=0&p=42968&

Oh, and :thumbsup to the kaptain for hosting the pics... Lemme know, guys...

That looks really good. I would be interested in the rears only. Mine are the split kind. and I have a specific type of vinyl i would need. I will hit you up with the info.

Prices? and how long?

Originally posted by hazardeclipse
OK, here's the link to the pics... Please note this was the prototype... you'll notice the driver's seat fits a little better than the pass. seat, and the rear seat looks better than the both of them combined... that's the kind of learning curve we're looking at here. Erika (my sister) is REALLY good at this stuff, so the quality will definatly be there... Here's the link... http://forums.kaptainmyke.com/index.php?showtopic=3435&st=0&p=42968& Oh, and :thumbsup to the kaptain for hosting the pics... Lemme know, guys...

wow those look real nice. im down for a set in black; id take the a rear set as well if she ends up making them.

same here I'd be down if she ended up making them

Those are really good. Much better than what I had expected. Wow. Get me a set just like your's imo.
EDIT: You know hat I would Love!? Standard blacl l ike yours but the center insert being that black perforated material!! that would be sweet! Set me up.

wow thats really nice..i'd def. be down for a set as soon as i could save up the money :thumbsup

To late to edit my post so let me fix it here:

1. WarnerC - black vinyl - if those pictures look good
2. FlyinESi - Black/Silver Leather - Outside of seat black, center in silver - Back seats the same.
3. Scirio - Black/Perforated Black (if available) vinyl - Outside of seat black, center in perforated - Back seats the same.

EDIT: like this but black if you can find it, otherwise just plain black

Ok, at the risk of sounding dumb, are these seat covers? To my knowledge when a seat is re-upholstered the new material is sewn around the seat. Does this mean I need to send you my seats? If they are just covers, how do you get the headrest to sit that nice? Thanks for the info, sorry if this is dumb. I am interested in black leather, front and back but need to know the final price.

I might be intrested in blk leather also depending on the final price.

black/with silver like flyin tsi

any updates on these?

What happened with the original poster? bailed?

Originally posted by djtrickee
What happened with the original poster? bailed?

looks that way.

nope, i didn't bail... um... my sister wrote this thing out and wanted me to type it out.. it's kinda long... but here goes...

"To all whom are interested in seat covers:

Thank you all for the interest in my seat covers; they were an experiment that turned out very well, even to my perfectionist standards. I would be more than happy to make seat covers for all of you, but first I felt that I should let you all know about the limitations I'm up against. First, and most pressing, is time. I am very busy. I am currently enrolled in two universities, one of which is almost two hours away. I also have 2 jobs. My first priority will always be school. Secondly, I am not a professional upholsterer. I can make basic seat covers, i don't have a fancy embroidery machine and i can't make piping. Finally, i still have some details to work out before mass producing these things. Aaron's back seat has quite a few hours of hand sewing in it. As of right now I don't know how to get them to all of you without you hand sewing them yourself or having you send the bottom of the back seat to me, so I can sew it. The fabric used in Aaron's seats is not fire-resistant; and that is something that each of you will have to decide whether it is relavant to you. (It wasn't to me, until I saw someone's car burn down in the school parking lot last week...:thumbsdown) Also to make sure the seat covers have the best possible fit, i will need the current covers off of your back seat and the passenger seat, including the plastic clips that hold the bottom on, so they can go on the new seat cover. (Unless someone knows what they are called so we can go buy them.) I felt it only fair to let you all know my limitations and if there is anyone still interested in seat covers I would be willing to talk to you individually about fabric choices, prices, and any other concerns, or ideas you may have...(I'm going to set her up her own 2GNT login, so you can PM her...) Again, thank you for the interest.
-Erika..."

im still interested. as far as finding out what parts to use for the back seat so that we dont have to ship ours out, get a copy of the chiltons manual.......im sure it shows what parts are needed in there.

Originally posted by RSClipse9d7
Ok, at the risk of sounding dumb, are these seat covers? To my knowledge when a seat is re-upholstered the new material is sewn around the seat.Does this mean I need to send you my seats?

To install these, you take your old upholstery off... The ones we make fit kinda like stock... the bottoms attach to the seat pan with plastic clips, the backs of the front seats will be zippered on the bottom, so you'd never see it. The backrest on the back seat will also be zippered, but the bottom part of the back has to be hand sewn... that is what qualifies as the 'logistics' we are currently working out...

If they are just covers, how do you get the headrest to sit that nice?

As it stands, you may have to send us in your head rests, unless we use the stock plastic clips that are in place on your headrests, now...

Thanks for the info, sorry if this is dumb. I am interested in black leather, front and back but need to know the final price.

We're still in the process of pricing, right now... PM me for more info... BTW, these aren't dumb questions, If anybody else has ANY other questions, don't be afraid to ask... :thumbsup

Originally posted by injendsm
im still interested. as far as finding out what parts to use for the back seat so that we dont have to ship ours out, get a copy of the chiltons manual.......im sure it shows what parts are needed in there.

It's not the back seat that's the issue (well it is, kinda) but the parts we're talking about go to the bottom parts of the front seats. theres this long, plastic clip that is sewn to the upholstery that fastens to the seat pan. I don't think that's in the Chilton's manual, I'll look, tho. As for the bottom part of the back seat, we'll figure something out, then let you guys know... Thanks.

If anyone is still interested, PM me with your name, what color/material you want, and fronts & backs, backs only, or fronts only, and i will PM you back with a price...

im still confused about wether we have to give her our seats ?

Originally posted by hazardeclipse
If anyone is still interested, PM me with your name, what color/material you want, and fronts & backs, backs only, or fronts only, and i will PM you back with a price...

you have a pm.

Originally posted by WarnerC
im still confused about wether we have to give her our seats ?

I'll get back to you on that...

I'm interested! and i have all the time in the world If i get it i want tan perferated and black vynal.

PM me...

Update: I found the aforementioned 'plastic-clips' on the internet, so there will be no need to send in any parts of your front seats... As for the back seats, How do you guys feel about removing the metal rings from the foam to remove the old cover, then re-attaching them with new metal rings? that's better than sewing it right? I need opinions, guys... Lemme know...

im having a hard time visualizing that but it definitley sounds easier than sewing. I dont even know how to sew.. do you have a pic of what the rings look like?

Just lift up the bottom part of the back seat... they look like this... you need special pliers to put them on, but they're only like $20...

would they fit as securley as yours? because I only want the rear seats..

You have a PM

Originally posted by 97EagleTalon2nr
You have a PM

Originally posted by WarnerC
would they fit as securley as yours? because I only want the rear seats..

Probibly a little tighter than mine... we didn't use all the metal clips for my set...

cool im interested, and did you say she could do them two toned? like black outside and silver inside?

pm me for more info...

pm sent

i saw the pictures and i think yall did a good job....how much do you think it would cost me if yall did the front and back seats of my 99 eclipse in black? (preferably vinyl....but i'll take cloth if it's cheaper :p )

thanks :)

-nina

Originally posted by caffeineaddict
i saw the pictures and i think yall did a good job....

Thanks... :)

how much do you think it would cost me if yall did the front and back seats of my 99 eclipse in black?

RS or GS?

(preferably vinyl....but i'll take cloth if it's cheaper :p )

It's not...

thanks :) -nina

PM me with more info....

im still waiting for my price quote :(

ditto

Where are you located? I already have all my vinyl in a huge roll sitting in my room ready for my seats....just waiting to find someone to upholster them...






Turbo8u - "Iv'e never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Parts 4 Sale:

NEW C-Wings Carbon Fiber Double Sided TD3000GT Hood - $350 OBO (Problem with Underside)
VIS Xtreme GT CF Hood - $390 OBO
Single 12" Sub Box - $15 OBO
95 Heater Core - $35 Shipped OBO
97-99 Eclipse Reverse Lights - $45 Shipped OBO


Just Ask Q's & Make Offers (IM IN SO. CALI) HipHop615@yahoo.com

I'm located in Michigan...

EDIT: pm's sent to Darktalon and WarnerC