mang ..... can some body tell me how i can take out da bulbs in da freakn' fog lights!! so i can replace dem ...

i just bought da car couple of weeks ago ... s0o need advice !

thanks!!

just take out the screw that holds in the foglight cover, then check out the 4 "special" screws that hold the glass on the bulb. Its a six sided thing, with a post in the middle, i had to order a special tool, but once i got it it was a very simple process.

Thanks !!!

You need a tamper proof torx. You can get them at sears or most car stores. Make sure its a tamperproof torx. Leslie, the company that makes all the tools in the red and white packages(most car stores like pepboys sell them) make a whole set, which is what i got, for like $20.

i am actually about to install some new h3's. do you know what size that torx is? thanks

hey i can access the bulb but how to i remove the reflective plate behind the bulb. please hurry im in the process now with not much light left

read the owners manual, actually pretty good description. Watch you don't strip the screws though, otherwise you'll have to back it out with vice grips. Good luck.

edit:
like the owners manual says, you have to take the whole fog assembly out. It's much easier to replace the bulb that way anyway..

Originally posted by skid13
read the owners manual, actually pretty good description. Watch you don't strip the screws though, otherwise you'll have to back it out with vice grips. Good luck. edit: like the owners manual says, you have to take the whole fog assembly out. It's much easier to replace the bulb that way anyway..

I don't have a owners manuel

I stripped the screws, they were too weathered. I just replaced them all with some from the hardware store. No big deal!