i got some led lights off ebay last month and im still trying to figure them out. i tried to get help from someone off her but i didnt really understand them. so what i got were 10 little led lights, each with two prong. then i got 10 little resistors. THATS IT. so i went out and bought some speaker wire and a switch. and that what ive got now. i did some test runs and almost killed myself! if there is anyone who knows how to do it pls help!

sweetie, we should find you some good ones.....1 sec.

I got these off ebay for $30 US......they actually go over ur existing guages and are super easy to install.




the actual bulbs that you need to replace the stockers in the gauge cluser are these...the ones you HAVE are a major pain in the ass IMO.

#74 bulbs..halfway down

http://www.superbriteleds.com/1157.htm

Nm found it,

-------jezreel
1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting :thumbsup

Originally posted by Blizare
sweetie, we should find you some good ones.....1 sec. I got these off ebay for $30 US......they actually go over ur existing guages and are super easy to install. the actual bulbs that you need to replace the stockers in the gauge cluser are these...the ones you HAVE are a major pain in the ass IMO. #74 bulbs..halfway down http://www.superbriteleds.com/1157.htm

...Did I miss something? I did not see anything specifying about gauge cluster bulbs...

What are you trying to do with these LEDs? Each LED will probably need one resistor soldered to it (assuming the resistor is in the correct range ~680 ohms). Then hook it to 12 volts. If it lights, try reversing the polarity. It does not really matter which lead of the LED the resistor is on. If it still does not work, verify the resistance of the resistor you are using, and if in tolerance then you may have fried the LED with your prior messing around =] Do not worry, LEDs, depending on color, can be as cheap as 0.25 from Radio Shack.

see but yea, thats /\/\/\/\ a PITA IMO. mine took 12 mins to hook up.

http://www.sounddomain.com/id/firebretha3

page three, i still need to work on it but should give you some info.

Vote for Everything you can while your there, :) and pick which rims you like in exchange for the info.

thanks you everyone for the help. ill try, and get back to you how it went. im not to good with saudering though :( so hopefully i dont screw it up too much! :)