Go back to previous topic
Forum nameInterior/Exterior
Topic subjectHow to remove the non-power antenae!!??
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=7335
7335, How to remove the non-power antenae!!??
Posted by Niclipse, Sep-09-01 12:10 PM
Hey guys, I am trying to remove my non power antenae from my car so I can have the hole shaved with bondo, and have a roof-mounted antenae.

Anyway, I removed the left portion of the trunk's interior and disconnected the antenae wire that goes to the cd player and unscrewed all other screws. Anyway, the antenae feels really loose, but I can't get it to pop out? Has anyone done this yet?
Please get back to me.

-Nick


7336, RE: How to remove the non-power antenae!!??
Posted by Amish_Eclipse, Sep-10-01 04:20 AM
yeah i'm doin the same thing. i'm puttin a beetle/passat antenna on the roof.

"i'm like a dog, i don't speak but i understand."
-jay-z from "never change" on the blueprint

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)
7337, RE: How to remove the non-power antenae!!??
Posted by LoudEclipse, Sep-10-01 09:20 AM
mine just came out, easy smeasy
7338, RE: How to remove the non-power antenae!!??
Posted by Niclipse, Sep-11-01 06:38 AM
I still have the rubber on the antenae stub, and it's loose, but wont give. any suggestions??

-Nick


7339, I DID IT!
Posted by Niclipse, Sep-11-01 01:09 PM
I read in my Chilton's about a peice that must come off, and I figured out what my problem was...

Above the rubber peice where the screw for the antenae goes, that metal plate has to be unscrewed. Just do that and it comes right out. And to this I was trying to bang it out. Anyway, the hole is now covered with electrical tape and ready to be shaved.

-Nick