| Go back to previous topic |
| Forum name | Interior/Exterior |
| Topic subject | how do you remove..... |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=72999 |
72999, how do you remove.....
Posted by Eclipse R97, May-31-04 05:41 PM
Hey ummm....I bought an exshaust w/silencer and after getting it welded on I can't seem to remove the silencer. Any help would be very appreciated.
|
73000, RE: how do you remove.....
Posted by Steve, May-31-04 05:44 PM
there should be a screw on the outside holding it in or a bolt.
|
73001, RE: how do you remove.....
Posted by Eclipse R97, May-31-04 06:05 PM
yea I did remove the screw but the silencer still doesn't want to come out.
|
73002, RE: how do you remove.....
Posted by Eclipse R97, May-31-04 06:06 PM
Yea I have removed the screw but still doesn't want to come out so thats my problem.
|
73006, RE: how do you remove.....
Posted by pfmicks, May-31-04 07:08 PM
pull!!!! PUll!!!!!Pull!!!!!
Keep pulling on it till it comes out...i had the same problem
Also be careful not to rip anything that you don't want out too
|
73017, RE: how do you remove.....
Posted by ashah000, Jun-01-04 02:43 AM
Mine wont come out either. I have pulled the shit out of it and the thing wont even budge.
|
73018, RE: how do you remove.....
Posted by PowerEclipses, Jun-01-04 04:01 AM
You are a bunch of girls... Get your ass in gear and use some sort of tools... you shed :D
|
73019, RE: how do you remove.....
Posted by 95GSEclipse, Jun-01-04 04:22 AM
to get the one out of my old obx type h i cut out the center of the silencer with a sawzal then used a c clamp to pull out what was left of the silencer.
|
73068, RE: how do you remove.....
Posted by eklipsdrvr99, Jun-02-04 10:12 AM
I found that the wrench for adjusting coilovers works really good to get my silencer out.
|