i went to hosetechniques.com and they don't have any sets for the nt, so can anyone tell me what Universal kit they used either from them or someone else who sells the stuff or just how much stuff i need?
also, does anyone know where i can get orange wire loom?
thx

javi d
vroom n' boom

Try RRE:
http://www.roadraceengineering.com
in the new product section they have a hose kit.


99 GS

i got the hose kit from summit racing. but there isnt really too many vacum hoses on our cars. it still looks nice though


http://geocities.com/shogunltw/
People that say "money is the root of all evil" dont have any. BR

for the hoses....RRE has em. for the loom, streetglow is selling loom in every color under the rainbow.

__________________________
...just my $.02
95 GS

Silicon is good if you plan to go turbo. The engine bay gets much hotter than before, so you don't want that stuff getting all crusty and all.


95' Eclipse RS
AFX Pulley | Autometer Bezel Gauge Holder & Modified A/F Ratio Gauge | B&M Super Oil Cooler | Energy Suspension Shifter Bushings | JAZ Oil Catchcan | Performance Muffler | HKS Air Filter | KYB AGX Shox | Skunk2 Coilovers | FU, RU, RL, and RRE FL Tie/Strut Bars | RS to TSi Rear Disc Mod | RS to TSi upgraded F&R Sway Bar | 97' Spyder Eclipse 5 Spoke Wheels | HKS TYPE 1 Turbo Timer | Star Stage 1 T3/T04E BB Turbo Kit | Schroth Autocontrol 3-Point Harness | and 1 HiGhLy SkIlLeD DrIvEr! |

Silicone hose is great fo rany engine bay. It's not only heat that damages the rubber hoses it's age. The silicone lasts longer and doesn't dry rot easily so you shouldn't really get vaccum leaks with age.

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, NRG Susp. Motor Mount Ins., 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, SS Clutch Line

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT, Hooker 4-1 Stepped Header

Waiting for: Front Lower Tie Bar, Ported/Polished Intake Manifold

I plan on getting the "fast and the furious" Hose Techniques kit. They have one that comes with a lot for 148. I have a $10 coupon I got at the Nopi tour stop I went to. If I have any left over, I will sell it to someone local. I am getting blue and silver.

You're going to spend WHAT?????

The Road Race Kit is $20, and comes with enough hose to do ALL the vaccuum lines. The Hose Techniques kit is for the 4G63, not the 420A. And $150 is an obscene price to pay for vaccuum line. If you want more than what came with the Road Race Kit you can buy legnth of colored silicone hose. You're going to pay enough to put hose on 7 people cars to do just your car? I wish I was the guys at Hose Techniques... to able to put that big a mark up on things and make that kind of proffit... damn I'd be rich.

Bottom line... There is no reason at all to buy a kit for $150 to get what you can get for $20.

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT (partially installed)

Waiting for: Front Lower Tie Bar, Ported/Polished Intake Manifold

Listen to Michael, don't spend $150 for a silicone hose kit. I bought the Larson Hose Kit for 2GNTs from Road Race Engineering for $20 and I still have hose left over! It will cover every vacuum hose you need to replace. They have blue, red, yellow, and black. I recieved mine within a week.

As far as wireloom, check out MachV. Their kit comes with 10 foot of 4 different sizes. I replaced every bit of wireloom in my engine bay with this kit. I still have loom left over! They have blue, red, purple, yellow and green. The cost is $16.00!

Douglas
-- 97 Eclipse GS --
Hiper Industries R1 Cold Air Intake
Arospeed Tunable Bomb Muffler 4.0" Tip
Custom Mandrel Bent 2.5" Cat-back Piping
Blue Silicone Vaccuum Hoses
Blue Engine Wireloom
Custom 3 Piece Mesh Grill
-- In The Mail --
Lo-Tek Triple Gauge Full Pillar
Autometer Ultralite Nitrous Pressure, EGT, Fuel Pressure Gauges
Accel 300plus Thunder Sport 8mm Ignition Wires
NOS 75-Shot Wet Kit