| Go back to previous topic | | Forum name | Interior/Exterior | | Topic subject | need help with altezas, pls reply | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=7060 |
7060, need help with altezas, pls reply
Posted by eclipticrider, Jul-21-01 04:26 PM
ok, i just got my altezas today. and put them on today. but i noticed that the far side lights shine white.??. i don't think this is susposed to be like this. what do i have to do?? replace the bulb w/a red 1, or take the bulb out all toghether.??.
and i also want to know how to make the center piece light up. i know i saw someone here w/that. thanks
www.clubs.yahoo.com/clubs/eclipticrides
mods:
GS-T muffler
pvc cai
hotter spark plugs
sticker on back
mesh grill
piaa plasma blue fog lights
mesh over the rear center piece
mods to come:
turbo/nitrous/cyclone engine swap
one of the three.
eibach coilovers
17 in. white racing wheels
custom exhaust
body kit
paint job
wing
ect.
|
7061, RE: need help with altezas, pls reply
Posted by CoBen67, Jul-22-01 12:57 AM
Hi,
I have the Gen II altezzas also. I replaced that far bulb with red coated bulbs which give the lights a nice look at night. To put a white one in there might get you attnetion from Mr policeman! I did the center mod too. Check "Oracle's" web page for the directions on the center mod for the altezza's. This was a big help when I did mine.
Later
Marcus
CoBen67
|
7062, RE: need help with altezas, pls reply
Posted by HeDog, Jul-22-01 12:58 AM
You do need to replace the outer bulb with red ones. I picked up some APC bulbs for about $10. As far as the center light mod, just go to the mods section in the 2gnt.com site.
HeDog
'95 Nstar White GS (AT) w/blue fade
Performance:
Iceman Cold Air Intake
Thermal R&D 3" Turbo Exhaust
Suspension:
Focuz RSII Dual Spring Coilovers
Tokico Blue Struts
Front Upper Strut bar
Exterior:
'99 Front & Rear Bumpers
Chrome/Clear Projectors
Catz Zeta 00 Headlight System
PIAA Platinum Low beams
PIAA 1100x Driving Lights
G2 Altezza Taillights
Clear Corners
3 Piece WW Midwing Spoiler
|
7063, RE: need help with altezas, pls reply
Posted by eclipticrider, Jul-22-01 10:10 AM
thanks, for now i'll just pull out the white 1s. i'll probably get some different colors as well as red. for show use.
www.clubs.yahoo.com/clubs/eclipticrides
mods:
GS-T muffler
pvc cai
hotter spark plugs
sticker on back
mesh grill
piaa plasma blue fog lights
mesh over the rear center piece
mods to come:
turbo/nitrous/cyclone engine swap
one of the three.
eibach coilovers
17 in. white racing wheels
custom exhaust
body kit
paint job
wing
ect.
| |