Everyone that has engine bay pics post them here.

here is a somewhat recent pic. the engine bay will look much better as soon as i finally get the money together for some boost.

here are my old ones about 6 months old but not much has changed since

^^^^ im sooo jealous of you!

I want a turbo..:(

Originally posted by Ryan_Hes

^^^ Where is your battery?


Undergoing MAJOR modifications, inside and out: Sneek peek at phase 1 and 2 shown;
End of Project Goal - 4/23/04
member# 2498 / girl member# unknown

Just had to post the turbo pic after my turbo woes..I like it tho...awesome shit man

Damn, what a mess!

Originally posted by insiderGS
Damn, what a mess!

it may be a mess but it blows my engine bay outta the water.

Originally posted by CrazyEclipse

Originally posted by Ryan_Hes

^^^ Where is your battery? Undergoing MAJOR modifications, inside and out: Sneek peek at phase 1 and 2 shown; End of Project Goal - 4/23/04 member# 2498 / girl member# unknown

In the back. Well, it's on that ledge that seperates the seats from the hatch area. I dont have a pic of it yet...Ill get one soon.

Yeah...it's filthy but I live on a dirt road right now.

Originally posted by sonikbewm
Yeah...it's filthy but I live on a dirt road right now.

dang dood. :D

Wow, that engine is very dirty. Have fun tryin to clean that. Take it to a car show and don't clean it. You'll win Best Dirty Engine award for sure.

lol...thanks guys. Living on a dirt road is shitty. Thankfully I am moving in a couple of months. Last time that I cleaned it, my ecu took a shit so it has never been cleaned since.

Newist one I have. Still trying to convert everythng over to red and what not.



98 GS
HRC Stage II
14.852@94.43
http://members.cardomain.com/lonnie1977

kinda a bad shot, but the most recent one. just waiting for my coilpack, wires, and powdercoated valve cover..



jon - elude
2GNT - n2o

no turbo =( yet...




Mods: Custom port and polished head (done by me thank you very much), bored out block, higher comp. pistons, micro polished crank, high performance valve job, Injen short ram, Greddy SP exhaust, K&N breather filter, blue color matched wire loom, Eibach sport line springs, Ractive front strut bar, Matrix rear strut bar, Excel TZ-7 white rims, Kuhmo rubber, Mitsubishi logo shifter, free mod short throw shifter, Autometer pro comp oil pres., water temp., A/F, Autometer sport comp fuel pres., kill switch, flip switch starter, more to come

wow you guys almost make me wanna buy a 2gnt-t. speaking of which, whatever happened to Dave_FL?

Originally posted by darkside
no turbo =( yet...

it's ok me neither... =(
haha nice battery... =P

Originally posted by MCubed45

Originally posted by darkside no turbo =( yet...

it's ok me neither... =( haha nice battery... =P

ive got the same one. check my post at the top. i thought i was the only one.

lates
james

2 years ago.. no new pics, sorry.

Well mine's bigger... :P

Originally posted by DR1665
Well mine's bigger... :P

what the hell is up with the zip ties? its like a bad hair day for your engine...
but nice none the less!



Mods: Custom port and polished head (done by me thank you very much), bore and hone block, high comp. pistons, micro polished crank, high performance valve job, K&N beather filter, Injen short ram, Greddy SP exhaust, blue color matched wire loom, Eibach sport line springs, Ractive front strut bar, Matrix rear strut bar, Excel TZ-7 white rims, Kuhmo rubber, Mitsubishi logo shifter, free mod short throw shifter, Autometer pro comp oil pres., water temp., A/F, Autometer sport comp fuel pres., kill switch, flip switch starter, more to come

Still gathering parts for the turbo. Check out the cai hacked into a semi short ram.

My old 420a engine bay. 2yrs ago



#333
www.dsmlife.com

A lot more people are turboing their 420a than I thought. I cant wait to add my picture, hopefully another week or two

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild.
*Beginning Project: Boost

_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

Mitsubishi makes the ugliest exhaust manifolds ever.

Originally posted by EclipseRST
Mitsubishi makes the ugliest exhaust manifolds ever.

Yes, trust me they suck, mine has a crack in it. And its a PITA to put a big turbo on.
my old 2gnt.

Originally posted by EclipseRST
Mitsubishi makes the ugliest exhaust manifolds ever.

The heatshield's going back on after I trim it and clean it up.

HAHA mad old school pics VVVV



dont ask what happened, I tore up that car through the years haha

the goodness, you guys know you wanna hump it VVVV

evan i love the gsr-t but that 2gnt is pretty bad is that string holdin on your bumper? what happened to good ol duct tape crazy kids lol good stuff though

I nailed a traffic cone that some kids put in the middle of the street, wasnt paying attn on a hill and then bam
after many months of driving the fiberglass got week adn wouldnt support the bumper
I didnt have the little piece that help the bumper up top near the hood latch

so i did what I had to do, ZIP TIES own

i said dont ask what happened, I put the ecipse through hell.... gsr-t is gone

but look for a new light car with gsr motor in it, but high comp and NA

not many people have the star, i mostly see hahn kits...... im about to buy a star..... is that a bad idea??

I wanted a Hahn's turbo kit, but those ASSFUCKERS wouldnt give me the time of day. So I decided to say fuck them, and went with Star. It's nice, but because I wanted the T3/T4, I had to wait a week, other than that they were really quick about it. I bought mine from http://www.diamondstarspecialties.com the guys are REALLY nice, I would recomend them highly.
Here's mine in progress, should be done this weekend.



Undergoing MAJOR modifications, inside and out: Sneek peek at whats going on
End of Project Goal - 5/12/04
member# 2498 / female member# unknown

Originally posted by CrazyEclipse
I wanted a Hahn's turbo kit, but those ASSFUCKERS wouldnt give me the time of day.

Hahahahaha, join the club and all I wanted was a stupid brass T. :P

Originally posted by CrazyEclipse
I wanted a Hahn's turbo kit, but those ASSFUCKERS wouldnt give me the time of day. So I decided to say fuck them, and went with Star. It's nice, but because I wanted the T3/T4, I had to wait a week, other than that they were really quick about it. I bought mine from http://www.diamondstarspecialties.com the guys are REALLY nice, I would recomend them highly. Here's mine in progress, should be done this weekend. Undergoing MAJOR modifications, inside and out: Sneek peek at whats going on End of Project Goal - 5/12/04 member# 2498 / female member# unknown

I been wonderin about diamondstarspecialties service..looks like I know who Im getting my star stage 1 from..

:cry

lol, most certainly an 'engine bay' now wheres the engine? probly parts of it in the bathroom...closet, under your bed...lol
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes