Can someone please tell me how to take the front bumper off...(if possible) in step by step information...thanx.
-LATEZ

1. open hood
2. remove five bolts that are in the hood latch area
3. remove plastic screw things out of splash guards in each wheel well(only the ones that connect the bumper to the splash guard)
4. remove two bolts on each side that connect bumper to fender
5. bumper is off

1.) stop using all caps
2.) plz speak english
3.) you can PROBABLY just flex the bumper down a little and access the screw(s) you need in order to remove the headlight assembly. be careful though...

Originally posted by GhEttOrAiD
1.) stop using all caps 2.) plz speak english 3.) you can PROBABLY just flex the bumper down a little and access the screw(s) you need in order to remove the headlight assembly. be careful though...

agreed, lose the caps.

That bolt is a PITA I never put mine back in....I can remove a bumper in about five min tops.

Originally posted by Pushin420a
That bolt is a PITA I never put mine back in....I can remove a bumper in about five min tops.

yeah, even if it's your first time...shouldn't take more than ten minutes

Caps lock hurts my eyes.

CAPS LOCKS = FLAMES!

And for the millionth time, you DONT NEED to take off your bumper. grab a flat head, wrap a rag around the tip, place it betwwen the top of your bumper and the bottom of the headlight, push down on the handle. It will press the bumper downard and give you enoough space to get that pesky bolt. You'd be amazed how much the stock bumper can bend.

what if the screws for your fog lights are rusted and stripped?

Here's the way it's supposed to be done properly.

Step by step with pics. Go to this link and look about halfway down the page for the tech topic.
http://www.rcaz.com


No need to cause stress cracks in the paint and tear out those two bolts under the headlamps. Do it this way once and then take whatever short cuts you want later.

OMGHI2SEARCHBUTTONNOOB

Holy crap...use the f'ing search no0b.