I got some wire mesh for the front grill and openings. I assume I have to take the bumper off so does anyone know how to do it?

depeds on the year of car, considering the difference in the bumpers from the 95-96 and the 97+ . mine is a 95 and i didnt have to take off teh bumper although im sure it would be much easier if you did, but like i said you dont have to on the 95-96, but there will be this black plastic piece you will have to remove or make it so you can get the grill past it. well if you need help and have a 95-96 then you can ask me more, but i dont know much about the 97+ bumpers

-Jason






95 GS
short air ram - custom grill - moved front license plate - custom stereo system

You don't have to take the bumper off at all. I did because I had to do some stuff in there. Alls you have to do is get under there and take out that black pice "screws in" and stick it up there trim it and zip tie the bitch. Oh if you are goin to take the bumper off you should shit can the the top screws under the head lights and the bottom skid thing. Zip tei the lower part of the wheel well "just snaps in you dont need to realy" I don't have a bumper brace thing in there because I had a Blitz kit for a mounth or to and I couldn't use it.

Thanks bro. Hey, what do u cut the stuff with??


1997 Mitsubishi Eclipse RS
clear bumper lenses
Ivers Intake
Greddy Exhaust
Neuspeed springs
pics and more mods to come

Wire snips

Wire snips

If you have a 97-99 Eclipse and you have fog lights there is a 6mm screw that you can use to put the sides on with so you dont have to drill