I have an aftermarket power window kit on my RS and I can get some GST power windows door panels for cheap. Now would it be easy to tap into the wires of the stock GST door panels so I can splice my aftermarket window one into the stock ones? Anyone have a picture of the inside of a stock power window panel? THanks
Alvin

Alvin

96 RST

http://www.imagestation.com/mypictures/inbox/view.html?id=4193961127&url=http%3A%2F%2Fwww.imagestation.com%2Fpicture%2Fsraid99%2Fp45653afedba6629e15fd2139c2f81811%2Ff9fac4a7.jpg&caption=old%20029

Star turbo kit /Starion FMIC / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / MP 60mm TB/ Nology wires / Joe P BC / Southland Dual Friction clutch

i just did this like 3 days ago. its not that hard. well, was for me, but wont be for you. ill give you all the wire colors and functiopns tommorrow when i pop the door panels off. i have the spal kit. you have to use the stock door panel switch panel. and get ready to do some grinding. cause the handle that you used to crank the window with stocks out too far. and you have to cut it. pita!@!!@@##

hmm, i never had to cut anything and i upgraded to GS+ door panels, but i kept my switches mounted the in the center console...more interesting and something not everyone has.

eh, my old grand am has switches in the middle. gay if you ask me, but i couldnt fit the door panels over that damn crank.

well, i did add the bolt spacers to mine to move the crank assembly back like 1/4" or so. it is sorta a tight fit, but no rubbing. and just FYI, iv gotten lots of props on my switch locations, its not some hack trash job....looks stock :thumbsup

The one on the right is crooked.

Can someone post the wire diagra mto do this or email it to me at
scothern@insight.rr.com

I take it I wouldn't have to buy the switch kit with the SPAL kit if I were to do this?

Originally posted by 96eclipse2nr
well, i did add the bolt spacers to mine to move the crank assembly back like 1/4" or so. it is sorta a tight fit, but no rubbing. and just FYI, iv gotten lots of props on my switch locations, its not some hack trash job....looks stock :thumbsup

What, did you do pull the guts from the GS+ door and use it on yours or just the switches.

let me know


EDIT: I see you have the SPAL power window kit, where did you get it, I used Autoloc back in the day and it sucked

BUMP

Originally posted by Skrilla
BUMP

Bump gawddamnitt

You don't know where to get a SPAL kit? Ebay dude :thumbsup

Originally posted by a_miller_76
You don't know where to get a SPAL kit? Ebay dude :thumbsup

points to you dude for actually aswering my question after 5 days and 2 bumps