whats up everyone...my question is...how should i go about mounting my turbo spoiler on by myself. I have a drill and all that but should i bolt it on and also use industrial tape or just bolts. also i have these humongous holes in my trunk now... how much is it for a body shop to cover them up. Thanks everyone and please tell me how yall went' about it.

Hoon

You might want to use 3m double sided emblem tape. Not the thin DS tape, but that spongey (?) kind. It helps keep water out from under the wing posts. Also i think Cyan posted that he paid $800 to weld and paint the hatch and fender. Are you keeping the side pieces and just filling the center hatch hole? If so it'll most likely be cheaper.
Deze

96' RS
IM: Deze2g
"Friends don't let friends drive stock."
http://www.angelfire.com/geek/dezeclipse

You definitely want to bolt it on. You should have rubber gaskets that will fit under the footings as to prevent water leaking into your rear deck. If you don't have gaskets, use automotive double sided tape and put some type of sealer around each hole on the top of the trunk. That will also prevent water from coming in. As far as the holes in the trunk, make sure they weld them shut. If they try and use bondo or anything else, you may have cracking occur after a while. That's the best way to close the holes. I don't know how much it would cost to do this, but that's what I had done on my car, and it looks perfect.

HeDog

'95 Nstar White GS (AT) w/blue fade

Performance:
Iceman Cold Air Intake
Thermal R&D 3" Turbo Exhaust

Suspension:
Focuz RSII Dual Spring Coilovers
Tokico Blue Struts
Front Upper Strut bar

Exterior:
'99 Front & Rear Bumpers
Chrome/Clear Projectors
Catz Zeta 00 Headlight System
PIAA Platinum Low beams
PIAA 1100x Driving Lights
G2 Altezza Taillights
Clear Corners
3 Piece WW Midwing Spoiler

If anyone knows how much it is to fill holes, please post here, I have the 97 talon wing, but i might sell it if its too much $$$ to fill the holes that are there from the wing on there now.
___________________________________


". . .the Eclipse/Talon looks like it's going a hundred
miles an hour when it's sitting in the driveway."

to fill in the eclipse 3 peice holes it's about 300 weld and 200 paint

Chris Dishmon

"Fillet Mignon?!?!?! How about a big slab of tube steak for the pretty lady."

chrisdishmon@hotmail.com
http://klipzracer.homestead.com/index.html