| Go back to previous topic | |
| Forum name | Interior/Exterior |
| Topic subject | how to hook up a tach |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=6066 |
|
6066, how to hook up a tach Posted by eclipticrider, Jun-28-01 03:50 PM how do i hook up an after market tach, where do i hook the wires in, i got it for free from my step brother, it's still in good conditoin, but it don't have instructions. i think it has four wires. any help?? thanks | |
|
6067, RE: how to hook up a tach Posted by cyan, Jun-28-01 06:40 PM the white wire goes to a 12V lighting wire, the red wire goes to a 12V power wire, the black wire is the ground wire and the green wire goes to the tach signal wire off the ECU which was burned when my car caught on fire and i cant remember which wire it was so i need this info too so i can hook it back up when i get my car back. | |
|
6068, RE: how to hook up a tach Posted by eclipticrider, Jun-29-01 01:03 PM where is the wire from the ecu at?? | |
|
6069, RE: how to hook up a tach Posted by cyan, Jun-29-01 05:35 PM if you look at your engine, behind the fuse box there is this finned silver metal box, on the left side of that is a big ovular plastic panel with a single bolt in the center, you dont have to unbolt it, just pop off the four plastic clips and the cover will come off exposing all the ecu wires | |
|
6070, RE: how to hook up a tach Posted by cyan, Jun-29-01 05:36 PM hehe, the ECU is the thing the "NOT" bottle is sitting on in my engine pictre. | |
