Does anyone have a write up on how to do this and what do I need for it. I went to Radio Shack and bought 5 blue LED's. How many do i need? and what else do i need. Any help would be nice. I tried searching but cant find anything. I need the whole write up.

Somebody i really want to do this tonight but i need a parts list and how to do it.

HondaHater21 made this writeup. Make sure he gets some points from you.:thumbsup

http://www.geocities.com/hondahater21/LedHVAC.html

There are LED replacement bulbs you can buy for your HVAC and gauge cluster. They are the #74 LED's and they work great.
http://autolumination.com/

i need a write up for gauge cluster not the HVAC

maybe you should have thought of that when you titled the thread.

taking the cluster apart isn't very hard, there are a few screws to take out, and the thing pops right out.
______________
Chris
96 ESI 5 spd
Milwaukee, WI

Originally posted by bullox
maybe you should have thought of that when you titled the thread.

LMAO! OWN3D}(

Again, there is no need to wire the LED's, just buy the #74 LED lights from above and be done with it.:thumbsup

ya the #74 LED's are only like $2.50 or somethin from auto lumination. that's where i bought mine. you'd spend about the same buying quality regular LED's anyways. but then you'd hafta solder in a resistor and mount and everything. PITA

just buy the #74 and DO A SEARCH
there's a couple threads with good info including specifically which bulbs you will be swapping (7 in all). also take note of polarity when installing. LEDs DO NOT work both ways :P

-marc

='95 RS 5spd Red=
Matrix TypeX CAI
A'pexi Turbo N1
Nakayama GT5 17's
Ractive STB
GSX Calipers
AEM 12.5" X-Drilled/Slotted Rotors

255 is fricken short