Go back to previous topic
Forum nameInterior/Exterior
Topic subjectStill need altezzas!!!
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=5619
5619, Still need altezzas!!!
Posted by cyan, Jun-18-01 02:39 PM
ok, i searched the archive and cant find the post i made before where someone replied saying they would give me their altezzas in a few months, i cant remember who it was that said that, if youre reading this, please let me know whats up.

otherwise, i still need to buy a set, preferably from skrilla or from anyone else that can sell me theirs for $75 that are still in perfect condition (no lenses loose, no leaking, etc)

someone help me

http://www.geocities.com/blue2gnt


5620, RE: Still need altezzas!!!
Posted by icjeclipse, Jun-18-01 04:53 PM
If i remember correctly, that wasn't to long ago and it probably wouldn't be in the archives yet. So don't search in the archives, but in the recent posts.

Ian
95 Eclipse RS
http://www.geocities.com/icjeclipse/index.html

5621, RE: Still need altezzas!!!
Posted by cyan, Jun-18-01 04:56 PM
yeah i conducted the search over all time periods and got nothing

http://www.geocities.com/blue2gnt


5622, RE: Still need altezzas!!!
Posted by Basikstylz, Jun-19-01 12:17 AM
Wussup??? I have a set...but they are on my car. I actually wanna just get rid of them..So if you have a set of stock taillights you would be willing to trade me. (I need all three pieces) I would do it. Of course I do have to warn you these altezzas do have the classic APC fishtank syndrome. I have been to lazy to seal them up. So let me know if you want to. you can hit me up on AIM. My sn is Basikstylz


Jeff
96Tsi

Mods-Injen intake, GReddy Type S BOV, GReddy Profec B, GC's, Kyb AGX's, CFDF clutch, NGK 1 deg cooler plugs, Magnacor 8.5mm wires, B&M short shifter, a thermal 3" cat back, and several other non-performance add ons.

5623, RE: Still need altezzas!!!
Posted by 99_GS, Jun-19-01 05:51 AM
LAST EDITED ON 19-Jun-01 AT 10:53 AM (PST)

Hey that was me... but it does have a little problem where I tried to seal it.. and you could probably redo them but it would be a pain.. I have a solution though.. I have some stock Tails in perfect Condition.. I want to get them out of my house.. How about I send Basikstylz my Stock Tails and he sends you his Altezzas? If he is ok with that.

Just drop me an e-mail:
obitus@hotmail.com
a-josht@microsoft.com


99_GS
ICQ# 40424747

5624, RE: Still need altezzas!!!
Posted by Basikstylz, Jun-19-01 06:17 AM
That works with me. your stock tails are in good condition right? anyidea how much shipping is gonna cost to ship the tailights?


Jeff
96Tsi

Mods-Injen intake, GReddy Type S BOV, GReddy Profec B, GC's, Kyb AGX's, CFDF clutch, NGK 1 deg cooler plugs, Magnacor 8.5mm wires, B&M short shifter, a thermal 3" cat back, and several other non-performance add ons.

5625, RE: Still need altezzas!!!
Posted by 99_GS, Jun-19-01 07:56 AM
Yeah, they are off a 99 Eclipse and in perfect condition... as for shipping, I am guessing around 10 or 15.00.. Just send me your info and I'll ship them out to you and then you guys can work out whatever.

99_GS
ICQ# 40424747
5626, RE: Still need altezzas!!!
Posted by Basikstylz, Jun-19-01 08:28 AM
LAST EDITED ON 19-Jun-01 AT 01:30 PM (PST)

Cyan,

So is this coo with you man??? if so let me/us know. hit me up either e-mail or aim. Basikstylz@aol.com

oh yeah here is a pic of the style altezzas I have. are these the ones you want?? its a geocities link so you will have to do the proporties magic trick. hehe





Jeff
96Tsi

Mods-Injen intake, GReddy Type S BOV, GReddy Profec B, GC's, Kyb AGX's, CFDF clutch, NGK 1 deg cooler plugs, Magnacor 8.5mm wires, B&M short shifter, a thermal 3" cat back, and several other non-performance add ons.

5627, RE: Still need altezzas!!!
Posted by cyan, Jun-19-01 08:29 AM
uh, i cant argue with that deal, sure basikstylz just email me i only want the two outside piece to save you some on shipping anyway. email me and you can ship the lights COD for the cost of shipping. so if its $20 to ship them and $5 COD charge, send them COD to my house for $25. just email me or call me 478-477-5852 or 478-318-1603 and let me know how much money to have ready for the delivery guy.

do you have any pictures of the water leakage?
thanks

http://www.geocities.com/blue2gnt


5628, RE: Still need altezzas!!!
Posted by cyan, Jun-19-01 08:32 AM
oh yeah, jeff, are your Gen1 Gen2 or Gen3 (chrome housing right?)
or just post a pic if you got one

5629, RE: Still need altezzas!!!
Posted by Basikstylz, Jun-20-01 05:12 AM
LAST EDITED ON 20-Jun-01 AT 10:14 AM (PST)

Hey 99_Gs I sent you an e-mail with my info so let me know whats up K.


Jeff
96Tsi

Mods-Injen intake, GReddy Type S BOV, GReddy Profec B, GC's, Kyb AGX's, CFDF clutch, NGK 1 deg cooler plugs, Magnacor 8.5mm wires, B&M short shifter, a thermal 3" cat back, and several other non-performance add ons.