So I thought I needed the metal wires bit, the one that has like a thousand wires in a circle, but I used it on the 'D' fromDOHC and ruined the look, Messed it up, looks very ghetto. what bit do I use, help.

start with the ones that are like granite or stone, not the fine bristle type brush ones. you should be able to grind that "D" back down to at least look right. good luck


got pics?

1- go to HOME DEPOT
2- in the TOOL DEPARTMENT, find the Dremel bits display
3- get the 120 GRIT FLAP WHEEL SANDER BIT (looks kinda like a little fan, with flaps of sand paper around the outside)
4- use this bit to remove the damage from the wire brush
5- use the Dremel metal polish (reddish brown if you have it. If not, any metal polish should work) and a soft, cotton-y bit to apply the polish, work it around a bit, then wipe it off and use a clean cloth bit to polish it to a shine.

TAKE YOUR TIME AND BE PATIENT. YOU CAN DO THIS! :thumbsup

Or quit being lazy and go to sears and get 120 grit wet/dry sand paper and also get some 600 and 1500.... and use your hands... those letters are nothing to do... 15-20 mins and you will be finished... This is the best way to polish.... and after your done use a buffing wheel with the red polish to make it look like a mirror........

Are there 600 and 1200 grit flapwheels?

:-) I'm lazy.

can we do this to our head lights i hate the yellow fog on my driver side!!!!

polishing by hand never works for me and i need something more permanent!!

WTB: Dodge Omni


http://www.geocities.com/shadyporshe851proof/frame_content/indexframe.html

mods: star stage III clutch + 60mm tb + the normal mods, bass, lights well u get the picture

that yellow piece in your headlight comes out when you take the headlights apart.........

No dude...His yellowed headlight case,not the orange plastic piece.....Look at his drivers side headlight, you can barely see it in his pic. The older headlights seem to do this alot. I heard once that a toothbrush and regular old toothpaste has worked for some people. Seems weird to me, but why not give it a try?

are you talking about the outside..... i think mothers chrome polish will take that off..........