| Go back to previous topic |
| Forum name | Interior/Exterior |
| Topic subject | Wiring m3 mirrors turn signal |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=47056 |
47056, Wiring m3 mirrors turn signal
Posted by 95 silver gs, May-08-03 09:48 AM
I was wondering what wires you guys used. I was thinking of splicing into the blinker wire its self and running it back that way will it work. thanks.
|
47057, RE: Wiring m3 mirrors turn signal
Posted by SILVERNT, May-08-03 09:52 AM
yes
|
47058, RE: Wiring m3 mirrors turn signal
Posted by Remy, May-08-03 10:12 AM
Thats what I did and it worked out fine .
95 gs-t
6 bolt swap
T-2small turbo
15 Psi
Joe P mbc
Greddy uip
Greddy lip
Greddy bov
Supra smic
Borla cat back exhaust
Gutted cat
Apexi Safc
Walboro 255 fuel pump
Autometer gauges -Egt,Air/Fuel and Boost
|
47073, RE: Wiring m3 mirrors turn signal
Posted by 95 silver gs, May-08-03 11:43 AM
Where did u run your wires though. Thanks
|
47083, RE: Wiring m3 mirrors turn signal
Posted by farmdogg55, May-08-03 12:41 PM
i ran mine underneath the fender.
|
47089, RE: Wiring m3 mirrors turn signal
Posted by 95 silver gs, May-08-03 01:11 PM
So just under the fender then to the door inbetween the panal and the door. U didn't run it throw the rubber boot. Thanks
|
47101, RE: Wiring m3 mirrors turn signal
Posted by farmdogg55, May-08-03 04:57 PM
thats right. i didnt run it in the boot. you cant even notice the wires...cover them with some electrical tape.
|
47135, RE: Wiring m3 mirrors turn signal
Posted by Marctronixx, May-09-03 02:49 AM
i did it that way also. i just tapped into the wire on the marker light and there was a hole in the fender (like a screw-sized hole that was made at the factory) ran the wires under the plastic fender and that runs in between the door and the car body, right under the boot in the door. cant notice them either. farm dogg gave me some good tips! :thumbsup
|