I need sme help. Who ever has painted there middle light, did you prep it at all like sand paper it or did you just paint over it with the paint that matched your car.
Thanx

I have not painted mine, but I would assume that it is safe to say that you need to prep it first! The prep is 99% of a quality paint job. Sand it down with a 1200 grit wet sand paper. Use a bucket of water with some liquid dish soap in it as it will clean the plasit while you sand it. Once it is fully sanded (should be hazed) rinse with clean water and then dry it. After it is dry wipe the whole thing down with wax remover (Make sure it is safe for plastics) and then prime and paint the tail piece!

Good luck!

...and that is how we know the Earth is banana-shaped!
***********************************

"Don't worry, I'm fluent in weirdo."


Hurricane_GS
eclipse@gcni.net
AKA: Glenn H. Shelton III
Saint Cloud, FL

1997 Eclipse GS Non-Turbo
---------------------
Drilled Stock Air Box
Custom Short Shifter
Illuminated Center Tail Piece

You are right glen...I have painted mine and it came out great. I didnt prime mine though. I put on three seperate layers of paint though. Allowing about 15 minutes of drying time in between coats. I also put two layers of clear coat on. It is easy to do. And after a couple days yuo can wax the piece and then it looks like new!!

DAVE_FL
97GS
AEM CAI
AFX PULLEY
AFX solid motor mount
Magnaflow exhaust
Sparkco 9mm wires
Eibach Pro Kit
tokico shocks
Altezzas
A Badass sound system
Indiglows,neons,and all that good stuff...hehe
BOOSTING SOON!!!!!