Someone a few threads down asked for a AC Button writeup so here it is for all to see :D It's my first write up so hopefully all of it makes sense. I might change a few things in the morning, but here it is. Oh yeah sorry for the crappy pics. I took them with a cam cordder since I don't have a dig cam yet...

http://webpages.charter.net/jasonk/AC%20Hvac.htm


Also if you need anything else about changing the lights these are good links too. Thanks Hondahater!

http://www.geocities.com/hondahater21/LedHVAC.html

http://sabrelink.com/probe/hvac/

Nice writeup Jason! :thumbsup

a good thing to note.. well an idea i had that does require a little time and craftyness.. is to actually solder the resister to the circuit board inline with the positive curcuit.. that way the button becomes plug and play and you dont have to fuss with hacking up the wiring of the car too much.. i tried to do this on all my later attemps of coversion..

just an idea.. to ponder and experiment with.

Cool.. Maybe I'll eventually change it over like that. Thanks for the idea.

if ya use the varad led's it comes w/ the resistor mounted to a tiny circuit board. fits perfectly on the top the existing ac board. i just shoved in the LED and soldered it to the existing leads where the harness plugs in. just look at the AC board. shouldn't be hard to trace which ones are for the LED and which ones are for the button.

-marc

='95 RS 5spd Red=
Matrix CAI
A'pexi Turbo N1
Hanabi 8000k HID
SPAL Deluxe Power Windows
Nakayama GT5 17's
GSX Calipers
AEM Rotors

255 is fricken short