Well I am still working on my gauges but I love how the rest turned out so far. Thanks to HondaHater and iamnotwhoiam....

Tell me what you think!!








Chad

Looking good. One of these days I'll get around to doing that.

Damn those look cool as hell :thumbsup

i did my main hvac controls.. but how did u do the ac button, and the other buttons??? same way?

:thumbsup :thumbsup :thumbsup :thumbsup

I like how it matches your radio

ac button's a bit harder. you gotta wire the LED to the circuit board inside the switch. not a lotta space in there.. plus you gotta put the resistor in there too. oh and that's only for changing the snowflake. i know some people wanted to do the green/orange light. that's an even bigger bitch.

-marc

='95 RS 5spd Red=
CAI
A'pexi N1
Hanabi 8000k HID
SPAL Deluxe Power Windows
Nakayama GT5 17's
GSX Calipers
AEM Rotors

255 is fricken short

good work...

it looks like my car that kicks ass everytime i see it

Actually the way I did it was to make a wiring harness that all of the buttons connect to. So basicly from that main plug of the HVAC light it branches out into like 8 different 2 wire connections. I did not have to solder anything directly to the switches. It will be really easy to get it back to stock as well if needed because all I have to do is pull the LED out and put the old light back in since none of it is soldered to the boards. For the AC button I just mounted the light and ran the wires straight back on the flat spot of the switch. Then I took the dramel out and got ride of the lip that comes down in the mounting hole on the top. Fits really snug still and works well. Its strange because I didn't do anything for the other AC light but it lights up blue when off and green when on. Worked out really well....

I love how it looks with my stereo aswell and actually that was th main motivation for me to get it done. Should look really good once I get the sAFC hooked up and the gauges done.

Thanks for the props guys!!

Chad

did you use varad led's or reg led's cause those are pretty bright and how many did you use

i wanna do my defroster buttons and all thoose...put i painted over them siulver to match my interior. And if i take the paint off..the button will not match. But i am torn because i love how urs looks. I got my hvac blue...but i want those buttons to now. damn u

hehe .... sorry Jim ;)

I used LEDs I found at a local electronics supply store. They were rated at 2500-3500 MCD depending on voltage. I used a lower ohm resistor to up the voltage to the maximum the LEDs were rated at. I think it was like 4.5V and I used 1/2 watt 270 OHM resistors to get it pretty close to that.

Chad

oz gs, you got time to write something up closer to plain english? :7 i wanna do that so bad cuz the colors would go with my panasonic head unit beautifully but i aint understand a word you said. ill grab your aim name and try to catch you on there

I will try and get some pics of what I did later on this week.

Chad

yeah if you could write something up i'd love it .. i tried doing something like this over on my cruise control / foglight buttons and now the lights dont work .. if you could write something up it'd be most appreciated

Sweet Dude. Can you email me some direction at scothern@insight.rr.com? I have already done the HVAC and want to do the defogger and the AC buttons. I'm just not sure what would go where. Can you help?